OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 6, GenuineIntel MixVibes DVS version=6.412 DLL langage=US version=6.290
System Setting -------------------- Load memory time limit=13 Load time=normal Low gui priority=No Equalization bypass=No MultiInstance=No
General Setting -------------------- Nb Mixer Channels=2 Nb Samples=0 Windows Moveable=No TAG V1=Yes TAG V2=No
Mix Setting -------------------- AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes Display Pitch=Yes Auto Match at load=No Bpm Range min=78 max=150 Loop in bar boundaries=Yes Security=No History=Yes Compressor=No Limiter=No
Sound Configuration -------------------- Nb Sound=2 Nb Mixer=0 Managment Type Multi Kernel Device=SigmaTel Audio Latency=24 Device=USB Audio CODEC Latency=24
Vinyl Configuration -------------------- Vinyl1 connected=CD Audio=USB Audio CODEC source=default Mode=Absolute Riaa=No Preamp Left=2 db Preamp Right=2 db Noise Filter=0 45T=No InverseLR=No PhaseInv=No Offset=0 ms Noise Level=-40.000 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way) Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370 Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Vinyl2 connected=CD Audio=Windigo BT Audio source=MIDI Mode=Absolute Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 45T=No InverseLR=No PhaseInv=No Offset=0 ms Noise Level=-40.000 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
(1) In the File/Options/Vinyl, I'm unable to select MULTICHANNEL as the "Audio" and hence I cannot select USB AUDIO CODEC for the "Source"
(2) I was able to select USB AUDIO CODEC for the "Audio" but all I'm getting is a high pitch sound from the mixer output to the speakers.
From what I can tell, it looks like you're using version 6 and haven't installed the proper drivers. Head over to the download center and grab the latest update. Are you trying to use an internal or external soundcard?
Atleast I don't need to buy another piece of equipmnt.
But now I'm back to square 1 in trying to solve this problem.
According to the mixvibes DVS LE manual that I got with the CD players: (1) In the File/Options/Vinyl, I should be able to select MULTICHANNEL as the "Audio" and USB AUDIO CODEC for the "Source" However I'm not getting the option to select MULTICHANNEL as the "Audio".
Update your DVS LE to the latest edition first, before going further. There is a Version 7 of the LE, available from the download center if you've registered your product on the forums, which I see you have.
You do not need to use the timecode CD on those CD decks. I believe they have an HID function which means the player can directly control the software. Connect your decks via USB first.
3-hour radio show, Mixvibes Cross only! http://soundcloud.com/stealthii/isa3 MacBook Pro 13" Summer-2011 16GB RAM, Vertex-III SSD OSX 10.7.3 Ecler Evo 5 Mixer Technics 1210MK5 x2 Ortofon S-120 OM carts x2
Update your DVS LE to the latest edition first, before going further. There is a Version 7 of the LE, available from the download center if you've registered your product on the forums, which I see you have.
Stealthii,
When I went to the download center, and selected the UPDATES section, the site is only taking me to the DVS LE 6.412 version which was last updated since 14th August 2008. If there is a version 7, somehow the site is not allowing me to access it.
Can anyone help in trying to get access to this update?
