Newbie Cross

   Post your tips and tutorials here
Forum rules
Click here to join MIxvibes on DISCORD https://discord.gg/gMdQJ2cJqa

Newbie Cross

Postby eflava80 on 17 Apr 2017, 14:56

Hallo zusammen. Ich bin nei hier. nach ausgiebeigen Tests der Demo habe ich mir die Vollversion von Cross gekauft. Ich nutze einen Numark Mixtrack Pro2 und ein AKAI MPD24. Cross läuft mit dem Mixtrack, allerdings würde ich gerne ein Mapping installieren falls notwendig. Zum anderen habe ich allerdings das Problem das der CUE/PGM Regler sich zwar bedienen lässt, aber im Cross auf einem bestimmten Punkt stehen bleibt. Der regler dreht sich, wenn ich ihn am Numark bediene aber die ursprüngliche Markierung bleibt stehen. Ich kann auch immer nur den angewählten Kanal vorhören aber nicht mit dem Reglker mischen...
Hat denn jemand vielleicht noch eine Anleitung wie ich den MPD24 Controller nutzen kann? Habe das bei YouTube gesehen. Die Anleitung hier (in Englisch) hat mir nicht so ganz weiter geholfen. Ansonsten nehme ich gerne jeden hilfreichen Tip von den erfahrenen Usern an. Danke! Gruss, Sven
eflava80
 
Posts: 4
Joined: 17 Apr 2017, 10:37


Re: Newbie Cross

Postby RoJeC on 17 Apr 2017, 20:11

To change the cue point you have to move the wave to the desired position. Then click Cue button while Play is paused. If you press Cue while play then your track will jump back to the cue position.

You can reset your cue point while play by using Shift-C at the keyboard.

The setting of Quantize determines the exact position it will be set.
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Re: Newbie Cross

Postby eflava80 on 10 May 2017, 14:42

Thank you but the CUE point was not the problem. The real Position of the controller for CUE Deck A and Deck B is not the same like in the GUI. I mean the controller CUE/MASTER for the headphones. My solution is to turn the controller on the position need before i start my DJ set.
eflava80
 
Posts: 4
Joined: 17 Apr 2017, 10:37


Re: Newbie Cross

Postby eflava80 on 10 May 2017, 14:50

Ich habe noch ein 2.Problem:
nach einer gewissen Zeit ist es nicht mehr möglich eines der beiden Decks über den SYNC Button zu synchronisieren. Das heisst, die BPM werden nicht mehr angepasst. Das egeht immer nur von einem Deck aus. Nach Neustart der App geht alles wieder wie gehabt. Nach Fehlersuche habe ich festgestellt, der MASTER Button an den jeweiligen Deck muss aktiv sein. Dass heisst, wenn die Syncronisation nicht funktioniert, muss ich den Master auf das andere Deck wechseln. Könnte mir das jemand erklären? Warum ist das so? Wie wechselt der Master zwischen den Decks und kann das mit dem Controller beeinflusst werden?
Ich meine den MASTER Button oben links und oben rechts in der Ecke von den Decks, direkt über dem Pitch-Regler.
Thank you! Regards, Sven
eflava80
 
Posts: 4
Joined: 17 Apr 2017, 10:37


Re: Newbie Cross

Postby FigDJ on 10 May 2017, 16:30

Ok. Perhaps the following explanation will clarify things.

1st in order for Sync to work correctly your beatgrid must be correct. Beatgriding is another subject, however, the beatgrid must be correctly aligned to the beat for sync to work.

Assuming that your beatgrid is perfectly aligned in two tracks
one that you play in deck A and
the other on deck B.
Track #1 is 120 BPM and track #2 is 122BPM
1. Now load and play Track 1 on deck A
Music is playing at 120 BPM.
The A deck is automatically the Master

2. Now cue track #2 on deck B (remember this one is 122 BPM)
Press sync on deck B which means (match BPM to master.)
You will see the BPM on deck B drop to 120.
You can Mix it and Now the track playing to the audience is track #2 in deck B at 120 BPM.
3. press stop on deck A and you are ready to cue up the next track.
When you pressed stop on Deck A, deck B became the Master.

Your sync calculation is as follows. Deck A is Master at Pitch 0 and running at 120 BPM. So it is running at normal speed which equals unity or 1

You want to find out what adjustment you need to transform
deck B from 122 BPM to 120 BPM.

120/1= 122/X
(120)*(X)=(122)*(1)
120X=122
X=122/120
X=1.01 Pitch control

Your sync determined that it must change the pitch by lowering it by 1.01 % in order to convert a track from 122 BPM to 120 BPM.

If in your general preference you have sync link enable any BPM changes in your master will be followed in real time by all synced decks.
Image
FigDJ
 
Posts: 1355
Joined: 22 Apr 2012, 17:03
Location: Odenton, MD


Re: Newbie Cross

Postby eflava80 on 15 May 2017, 10:40

Hi, thank you for the great instruction!!! I do it like this and everything will be ok! Thank you!!! Best regards
eflava80
 
Posts: 4
Joined: 17 Apr 2017, 10:37



Return to Tips & Tutorials




Who is online

Users browsing this forum: No registered users and 54 guests

Board index

 
 
   
 
© 2014 Mixvibes