Mixvibes Cross Problem + MIDI Mapping für Denon?

   Cross / Cross Pack / Cross DJ / Cross DJ LE
Forum rules
Dieses Forum ist für die Mitglieder reserviert, die ihre Softwarenummer im Profil des Forums eingetragen haben.

- Seriennummer der Software bitte unter "Persönlicher Bereich > Profil > Serial Number XXXXX-XXXXX...." eintragen.
- Bitte erst suchen, ob das Thema/Problem schon besprochen wurde oder in den FAQ danach suchen:
- Prüfen, dass Ihr die aktuellste Software Version und Treiber installiert habt(Download Center). (zuerst Seriennummer eintragen um Zugang zu bekommen):
- Das Problem bitte KURZ und DEUTLICH erklären; wir sitzen nicht vor Eurem Computer...
- MixVibes Produkt (DVS, Cross, Vfx?) ? MV Software Version (1.60 7.21, ...)? Hardware (U46MK2, ...)? Treiber Version?
- Bitte immer einen Konfig Report mitposten (Datei > Konfigurationsreport). Alles sollte am Laufen sein wenn dieser erzeugt wird.

Re: Mixvibes Cross Deutsche Anleitung + MIDI Mapping für Den

Postby Maik Mamo on 18 Feb 2015, 23:29

Hello Rojec,
thanks for your help.
I have the 512Buffer increased to maximum, no change, the same problem.
I have the power save function is disabled, no change, the same problem.
The general suggestions I have tried, no change, the same problem.
When I disconnected one of the two Denon 2900 and restart mixvibes, no problem. The music plays cleanly without interruption.
When I connect the second Denon 2900 the problems are back. :( :( :(

Ps. my English is not perfect, sorry ;)
User avatar
Maik Mamo
 
Posts: 25
Joined: 16 Feb 2015, 00:58


Re: Mixvibes Cross Deutsche Anleitung + MIDI Mapping für Den

Postby RoJeC on 18 Feb 2015, 23:38

You might want to check the denon forum to check if this is a known issue. To me it seems to be a driver issue. If you have them connected via a usb hub you could try a direct connection.
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Re: Mixvibes Cross Deutsche Anleitung + MIDI Mapping für Den

Postby Maik Mamo on 19 Feb 2015, 00:34

Thank you RoJec.
The Denon forum I've seen but it is not known issue.
I also believe that it is a Denon drivers problem.

what do you mean with USB hub?
I have the Denons directly connected to the USB ports on the laptop.
Have a photo taken by the device manager of the laptop with the USB ports.

Image
User avatar
Maik Mamo
 
Posts: 25
Joined: 16 Feb 2015, 00:58


Re: Mixvibes Cross Deutsche Anleitung + MIDI Mapping für Den

Postby RoJeC on 19 Feb 2015, 10:11

Sometimes USB hubs have trouble working parallel on all ports. So this might have been a cause.

Have you also checked your laptop's firmware/drivers are the latest?
Ronald

Image

Manual alternative link: ? https://www.mixvibes.com/wp-content/uploads/2017/10/cross-dj-user-manual.pdf
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/help/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4926
Joined: 20 May 2011, 08:55
Location: Bussum, Netherlands


Re: Mixvibes Cross Deutsche Anleitung + MIDI Mapping für Den

Postby Maik Mamo on 20 Feb 2015, 01:00

Hello RoJec,
Yes, i have checked, the laptop firmware and drivers are the latest.
Windows drivers are also the latest.
User avatar
Maik Mamo
 
Posts: 25
Joined: 16 Feb 2015, 00:58


Re: Mixvibes Cross Problem + MIDI Mapping für Denon?

Postby Maik Mamo on 24 Feb 2015, 02:33

So da bin ich wieder. Habe es jetzt mal mit einem aktiven 7 fach Usb Hub probiert aber jetzt zickt Mixvibes mit einem neuen Problem rum.
Er erkennt von einem der beiden Denon 2 Tastendrücke am Player und dann ist Feierabend und er erkennt dann nur noch die Tastendrücke von dem einen der beiden Denon obwohl bei beiden unter MIDI Online steht.
Habe Mixvibes auch schon komplett deinstalliert und Neu installiert was aber keine Besserung brachte.

Kann es sein das Mixvibes im zusammenspiel mit den Denon Sc 2900 noch ziemlich viele Bugs hat?
Denn langsam glaube ich nicht mehr unbedingt das es am Asio Treiber von Denon liegt.
Ich glaube eher das Mixvibes damit nicht zurecht kommt das 2 Denon angeschlossen sind denn wenn ich nur einen anschließe läuft alles bestens ohne Probleme.
Wäre nett wenn sich hier mal die Hersteller des Programms zu dem Problem äußern denn ich finde es mittlerweile ärgerlich das ich 129 Euro für das Programm ausgegeben habe.
Ich werde mir morgen mal die Testversion von Virtual DJ runter laden und wenn es damit funktioniert dann weiß ich das das Problem an Mixvibes liegt.
User avatar
Maik Mamo
 
Posts: 25
Joined: 16 Feb 2015, 00:58


Re: Mixvibes Cross Problem + MIDI Mapping für Denon?

Postby Rudi Royal on 24 Feb 2015, 07:11

Hallo Gemeinde, ich habe das Problem, daß mein rechter Gain Regler nicht funktioniert. Win 8.1 8 GB Denon MC2000. Gibt es da eine Lösung?
User avatar
Rudi Royal
 
Posts: 1
Joined: 06 Jan 2015, 18:58


Previous

Return to alles CrossDJ Mac / PC




Who is online

Users browsing this forum: No registered users and 8 guests

Board index

 
 
   
 
© 2014 Mixvibes