PROBLEM USING MIXVIBES DVS Ultimate WITH U-MIX44

[UncleVibes]

yes publish a config report "Post a configuration report if you are having a technical issue (preferences > configuration report). make sure both needles are on the record and that your pitch is at 0.
". If you are using 64 bits computer then use your sound card in 48 khz mode.

[jazzzax22]

Config 2011/05/24 20:50

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-10.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=1.000 Volume max right=1.000 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=CD
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-10.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=1.000 Volume max right=1.000 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl 3 not connected
Vinyl 4 not connected







Thank you very much for the help, it is not a record player its cd also by the way.
Thanks!

[UncleVibes]

set your sound card on 48khz and try again

[jazzzax22]

where do i do that sorry?

[UncleVibes]

from DVS sound panel options setup asio mode control options

[jazzzax22]

still not really sure how to do that sorry :s

[jazzzax22]

anybody ?

[community@MixVibes]

Hello, for you vinyl issue, it sounds as tough your vinyls are not calibrated correctly, to do the check up of your vinyls please follow the link to the FAQ, this will help you out: http://www.mixvibes.com/content/support ... timate-faq

Once your on the FAQ go and check the third issue: How do I check if the control vinyls or CD's are calibrated correctly?

[UncleVibes]

There is a known bug with the U44 at 44.1Khz so use it in 48Khz instead (only for 64 bits)
You need to read also the pdf manual included, it will make your setup easier.

[jazzzax22]

thank you for that information, im still confused on how to make it 48khz?