Forum closed (read only)
by joelbrown31 on 27 Mar 2011, 16:24
Hi, I have a U-Mix44 soundcard and am trying to record through the program audacity. I have searched on this forum and read the posts . I understand there is a way of recording by running a cable from the booth of the mixer to the mic input of my laptop. The problem is the sound i get on playback is a very low distorted crackle and i cant hear the song.. Is this a problem anyone else has experienced, or am i doing something wrong? thanks in advance
Config 2011/03/27 15:23
OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 37 Stepping 5, GenuineIntel MixVibes DVS version=7.400 DLL langage=US version=7.400
System Setting -------------------- Load in Ram Channel1= Yes Channel2= Yes Load memory time limit=13 Load time=normal Low gui priority=Yes Equalization bypass=Yes MultiInstance=No
General Setting -------------------- Nb Mixer Channels=2 Nb Samples=16 Windows Caption=Yes Theme=0 TAG V1=Yes TAG V2=Yes
Mix Setting -------------------- AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes Display Pitch=Yes Auto Match at load=No Bpm Range min=78 max=150 Loop in bar boundaries=Yes Security=No History=Yes Compressor=No Limiter=No
Sound Configuration -------------------- Nb Sound=2 Nb Mixer=0 Managment Type ASIO Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2 Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4 Managment Type ASIO 1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2 3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4
Vinyl Configuration -------------------- Vinyl1 connected=vinyl version 2 Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2 Mode=absolute Riaa=No Preamp Left=22 db Preamp Right=21 db Noise Filter=0 Hz 45T=No InverseLR=No PhaseInv=No Decalage=0 ms Time limit=720000 ms Silence seuil=-40.000 db SNR=40 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way) Time code percent=0.500 Volume max left=0.498 Volume max right=0.498 Volume optimum=0.370 Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Vinyl2 connected=vinyl version 2 Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4 Mode=absolute Riaa=No Preamp Left=23 db Preamp Right=21 db Noise Filter=0 Hz 45T=No InverseLR=No PhaseInv=No Decalage=0 ms Time limit=720000 ms Silence seuil=-40.000 db SNR=40 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way) Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370 Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Vinyl 3 not connected Vinyl 4 not connected
-
joelbrown31
-
- Posts: 4
- Joined: 02 Mar 2011, 13:17
by christiankoopmann on 27 Mar 2011, 18:02
Hey,
You put the cable of the booth or master 2 output of your mixer into the Micro-In of your laptop? Or is it also an Line-In?
When it is a micro in, this can't go well because the AD is often not the best one because for microphone you don't need those quality like Line in or line out.
regards Christian
February 2012 Mixvibes DJ of the Month DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)MEMBER OF: c00l People MV Society
-
christiankoopmann
-
- Posts: 1823
- Joined: 19 Dec 2008, 16:44
- Location: Paderborn, Germany
by Hannes on 27 Mar 2011, 18:26
christiankoopmann wrote:Hey,
When it is a micro in, this can't go well because the AD is often not the best one because for microphone you don't need those quality like Line in or line out.
regards Christian
not completely true, it´s due to the very different impedances of line and mic. Basically it´s like plugging in a line source into a phono input. (yes, mic and phono do have about the same impedance) cheers J
-
Hannes
-
- Posts: 4168
- Joined: 07 Dec 2010, 02:57
- Location: Vienna
by joelbrown31 on 27 Mar 2011, 19:31
Hi guys thanks for replying I am running the lead from the "booth" output of my mixer to the mic input of my laptop. I have turned the master level on my mixer down , but then audacity doesn't pick up any sound at all. When the mixer is at full volume I can hear it slightly but very distorted. thanks for the help
-
joelbrown31
-
- Posts: 4
- Joined: 02 Mar 2011, 13:17
by Hannes on 27 Mar 2011, 19:39
check in the systempreferences for sound. control panel->sound etc.->audio-devices there you should be able to set the input/outputgain for your mic in. also try to set the gain in audacity, and you also might try a simpler recorder than audacity. just google audio-recorder
-
Hannes
-
- Posts: 4168
- Joined: 07 Dec 2010, 02:57
- Location: Vienna
by Support@MixVibes on 28 Mar 2011, 11:41
Uncheck mic amp or gain on the audio panel for your computer input.
-
Support@MixVibes
-
by Chapman15 on 18 Aug 2011, 09:55
Hi, before you start to use Audacity to record audio from microphone that is inputed on laptop, you need to set it well. Also, when you set stereo mix sound device on your laptop, you might find a streaming audio recorder and use it to record audio. It is said to be simple.
-
Chapman15
-
- Posts: 2
- Joined: 27 Jul 2011, 05:09
by UncleVibes on 18 Aug 2011, 11:53
christiankoopmann wrote:Hey,
When it is a micro in, this can't go well because the AD is often not the best one because for microphone you don't need those quality like Line in or line out.
regards Christian
jkut wrote:not completely true, it´s due to the very different impedances of line and mic. Basically it´s like plugging in a line source into a phono input. (yes, mic and phono do have about the same impedance)
+1 chapman15 wrote:Hi, before you start to use Audacity to record audio from microphone that is inputed on laptop, you need to set it well. Also, when you set stereo mix sound device on your laptop, you might find a streaming audio recorder and use it to record audio. It is said to be simple.
There is one big difference with audacy it's not a free-ware the price is 26 € VAT included in the European union. But it does very well the job as an easy streaming recorder. tested & approved as efficient & useful.
-
UncleVibes
-
- Posts: 10254
- Joined: 22 Sep 2003, 14:36
Return to Technical support
Users browsing this forum: No registered users and 17 guests
|
|
|