Faders on mixer Does not work.

[P_Jean]

As I described above I want to Scratch , use the crossfader to switch the channels and do Cuts.You know what I'm saying? Thats all I really want , all the other things like controlling bass , treble and so on works on the mixer.

[christiankoopmann]

I would use the crossfader of the mixer. You have 2 channels out of the U-Mix. An MIDI Controller for the crossfader is not helpful then. To select the player which is controlled by your Timecode vinyl you should use your keyboard or mouse to select. I never scratched because for House and Electro I don't need it^^ so I don't know how you are working and why it is needed to switch between both decks while scratching.

Sry I realy don't know the best way for you.

regards
Christian

[damianpesta]

As I described above I want to Scratch , use the crossfader to switch the channels and do Cuts.You know what I'm saying? Thats all I really want , all the other things like controlling bass , treble and so on works on the mixer.

Thats the spirit. Helped me a lot.

@ christiankoopmann

I have connected the 2 channels to the mixer , As I said everything like KNOBS and so on works except Crossfader and volume faders , I mean they're not doing anything , while they're supposed to change the channel and control volume in the Mixvibes software as far as I know.

[Support@MixVibes]

I have set up everything my mixer is connected like that:

Line in my mixer to Output 1.
Line in my mixer to Output 2

Turntable is plugged in Input 1 And it works just fine.

My mixer is Behringer VMX 200
My turntable is Numark TT200
System : DVS Ultimate with U-Mix 44.

Its just single turntable I am using.

So your using an analog mixer, that mean that your audio is processed out of the box in the real world (no more digital here).

I have connected the 2 channels to the mixer , As I said everything like KNOBS and so on works except Crossfader and volume faders , I mean they're not doing anything , while they're supposed to change the channel and control volume in the Mixvibes software as far as I know.

Certainly not and they will never !
Your software is just replacing the audio and is feeding your mixer on its inputs : nothing more, nothing less.
So cueing, knobs, faders, crossfader are all handled by the VMX200 and won't remotely control the software.

[damianpesta]

So the only way is connecting it all through the MIDI Controller with Sound card right?Or is there any other way around without buying the controller which I do not need.

[Support@MixVibes]

What MIDI controller are you talking about ?
An other way to do what ?

[damianpesta]

Ok , I got it to work.The problem was that I did not actually plug in speakers through "Main out" from my mixer , now I guess I've ran into software problem.

When I play 2 tracks , somehow they are played both from the same channel.Any Ideas why is that?

[christiankoopmann]

Hey,

When you use the Carbon V2 Skin you can set the output channel for each deck. There you must set deck one to Out 1 and deck 2 to Out 2.
You can see it at the picture (red mark).

I hope it helps you

regards
Christian

[damianpesta]

Thanks for getting me on track but , whenever the Tracks are not loaded I can switch the channels and eveyrhting is ok.But once I load the tracks to both decks the channels just switch to 1 and I cant change them anymore , any wonder why?

[christiankoopmann]

One Track to both decks. Then normaly to the second deck there should be a @ at the Trackname in the deck.

I tested it and at my (7.218 it is as I set it. Before playing it was 2 and when I set the track both tracks there is also the 2 setted.) I don't know why it is switching.

What is your Audio configuration? Do you use asio or something else?

regards
Christian