DVS 7 has not signal from vinyl at Windows 7

[zhulit]

There is something wrong in your setup as you both have a proved and reliable software where we aren't at all in an experimental alpha stage.
As I know DVS works perfectly so I think you miss something.
You have no sound coming from mp3 decks and mixvibes. With the config report I have seen this is incredible if the setup is well done. But in vinyl mode there isn no setup done as both deck are at Odb that's true it can't work like that. The U46MK2 is a good sound card and your computer see it in Asio. I never thought your situation in years except when the plugs aren't in their good positions. So check your wiring to your mixer. The 2 outputs of your U46MK2 must be line one & 2 on your mixer. The output of your mixer must go to your amplifier & loudspeakers. The inputs of the U46MK2 must go to the outputs of your turntables. You don't have a driver problem as they are well recognized.
With the elements I got from you on this forum it's all I can say now to help you.

So you opinion is that i have wrong connected cables? Thats can not be... i have heard sound from vinyl when i have turn on bypass mode so cables are connect correctly moreover i have DVS more than year and i know how to connect cables and same connections works on normal (case style) computer correctly, but on windows XP. So its look like problem DVS vs WIN7. But thanks for view.

[Support@MixVibes]

when i have vinyll off , i can not play decks from DVS. When i press play nothing happened. In bypass mode i hear beep sound from A and B turntable right same result with normal vinyl. Same in windows i can play sound over U46 channel 1 so drivers works good. May be i dont understand what are you exactly asking for.. my english is terrible sorry .

* if nothing happen when you press play with the big vinyl button of the gui switched to OFF, then you don't have any soundcard into the software.

* windows don't use asio so this doesn't prove that you have proper driver installed.

* the config report say that you have asio drivers.

Please remove all installed drivers : ESI, Mixvibes, Asio4all and reboot the computer. You need to disconnect the soundcard to uninstall it properly.

[zhulit]

when i have vinyll off , i can not play decks from DVS. When i press play nothing happened. In bypass mode i hear beep sound from A and B turntable right same result with normal vinyl. Same in windows i can play sound over U46 channel 1 so drivers works good. May be i dont understand what are you exactly asking for.. my english is terrible sorry .

* if nothing happen when you press play with the big vinyl button of the gui switched to OFF, then you don't have any soundcard into the software.

* windows don't use asio so this doesn't prove that you have proper driver installed.

* the config report say that you have asio drivers.

Please remove all installed drivers : ESI, Mixvibes, Asio4all and reboot the computer. You need to disconnect the soundcard to uninstall it properly.

Ok so what... i will remove mixvibes driver v3. and next ?? I was trying that manytimes without success...

When i check in install wizzard asio driver mixvibes for vinyl control
so i cant play from virtual deck with vinyl button off. So like you said i dont have driver right in software but when you have really this problem install wizzard said you that asio driver isnt work.

[Hollender]

Okay, i have reconnected the turntables, also tested them with a normal record and the needles are okay.
Still no signal in mixvibes, it keeps asking me to check my needles or records.
Also can't play music in mixvibes with the vinyl button turned off.

Here's my config report.

Config 2010/11/05 22:33

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-MIXVIBES U46 1/2:L 2-MIXVIBES U46 1/2:R
3-MIXVIBES U46 3/4:L 4-MIXVIBES U46 3/4:R

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MIXVIBES U46 1/2:L-MIXVIBES U46 1/2:R
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:MIXVIBES U46 3/4:L-MIXVIBES U46 3/4:R
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Hopefully you can make something out of it, and i do hope my soundcard isn't broken.

Thx in advance!

[Support@MixVibes]

Ok so what... i will remove mixvibes driver v3. and next ?? I was trying that manytimes without success...

Now that there is no asio driver in the system try into windows to send and receive sound from the soundcard.

If it work then try into mixvibes in directsound mode (not asio).
(also check if MV can see any other asio drivers).
Now you know if the soundcard is burnt (or not).

As it has been proved that the MV3.0 drivers don't work for you, you can try with asio4all.

[zhulit]

Ok so what... i will remove mixvibes driver v3. and next ?? I was trying that manytimes without success...

Now that there is no asio driver in the system try into windows to send and receive sound from the soundcard.

If it work then try into mixvibes in directsound mode (not asio).
(also check if MV can see any other asio drivers).
Now you know if the soundcard is burnt (or not).

As it has been proved that the MV3.0 drivers don't work for you, you can try with asio4all.

Omg... i wrote that sound card is ok works in winxp on my next normal computer.But on my new netbook doesnt work under win7. Same i wrote that i change drivers, make clean installation of windows7, trying others developers drivers (esi,asio4all) without success.

So please stop advice me to check cabels and reinstall driver without connected U46 it looks like you advice to child without interest what you advice. Please something constructive. Only time wasting.... This weekend i missed next DJ show so im annoyed.

[Support@MixVibes]

Omg... i wrote that sound card is ok works in winxp on my next normal computer.

Omg, did you read what I wrote ? I don't ask you for an other OS on another computer, I asked you to test it on the same computer, with the same OS, without asio driver.

But on my new netbook doesnt work under win7.

A netbook ? with W7x64 ?
What kind of netbook is that ?

Same i wrote that i change drivers, make clean installation of windows7, trying others developers drivers (esi,asio4all) without success.

Yes but this doesn't told me if the soundcard work in directsound/wdm mode.

So please stop advice me to check cabels and reinstall driver without connected U46 it looks like you advice to child without interest what you advice.

Please read what I wrote, I never told you to change cable and about removing the U46 it was for a clean uninstall, I didn't told you to re-install anything !

Please something constructive. Only time wasting.... This weekend i missed next DJ show so im annoyed.

Something constructive ?

Please remove all installed drivers : ESI, Mixvibes, Asio4all and reboot the computer. You need to disconnect the soundcard to uninstall it properly.
Now that there is no asio driver in the system try into windows to send and receive sound from the soundcard.

If it work then try into mixvibes in directsound mode (not asio).
(also check if MV can see any other asio drivers).
Now you know if the soundcard is burnt (or not).

As it has been proved that the MV3.0 drivers don't work for you, you can try with asio4all.

[zhulit]

Omg... i wrote that sound card is ok works in winxp on my next normal computer.

Omg, did you read what I wrote ? I don't ask you for an other OS on another computer, I asked you to test it on the same computer, with the same OS, without asio driver.

But on my new netbook doesnt work under win7.

A netbook ? with W7x64 ?
What kind of netbook is that ?

Same i wrote that i change drivers, make clean installation of windows7, trying others developers drivers (esi,asio4all) without success.

Yes but this doesn't told me if the soundcard work in directsound/wdm mode.

So please stop advice me to check cabels and reinstall driver without connected U46 it looks like you advice to child without interest what you advice.

Please read what I wrote, I never told you to change cable and about removing the U46 it was for a clean uninstall, I didn't told you to re-install anything !

Please something constructive. Only time wasting.... This weekend i missed next DJ show so im annoyed.

Something constructive ?

Please remove all installed drivers : ESI, Mixvibes, Asio4all and reboot the computer. You need to disconnect the soundcard to uninstall it properly.
Now that there is no asio driver in the system try into windows to send and receive sound from the soundcard.

If it work then try into mixvibes in directsound mode (not asio).
(also check if MV can see any other asio drivers).
Now you know if the soundcard is burnt (or not).

As it has been proved that the MV3.0 drivers don't work for you, you can try with asio4all.

But you write if is soundcard burtn or not. so i said you that is not true cause soundcard works on my other computer thats all.

When is driver uninstalled windows can play sound over this soundcard. Mixvibes can play sound over directX but only one channel.

No more asio drivers mixvibes dont recognise.

No netbook but notebook my wrong.

With asio4all drivers no success same result.

[Support@MixVibes]

But you write if is soundcard burtn or not. so i said you that is not true cause soundcard works on my other computer thats all.

You're right the soundcard is ok.

When is driver uninstalled windows can play sound over this soundcard. Mixvibes can play sound over directX but only one channel.

Ok everything act as it should.

No more asio drivers mixvibes dont recognise.

Same here.

With asio4all drivers no success same result.

So you can't use no asio drivers with this soundcard on this VAIO.

If even asio4all can't see the soundcard then the issue is clearly between the device and the computer.

There are 2 things left :
- not enough power on the usb to power properly the soundcard with all channels (active usb hub or external ac adapter)
- usb 1 emulation of your i3 is buggy. Look on the Sony website if you don't have a more recent bios update for your model.

[zhulit]

If even asio4all can't see the soundcard then the issue is clearly between the device and the computer.

Yes, i think its too maybe is mistake on side of win7 with something blocking. Cause on first install one time its works on this notebook.

There are 2 things left :
- not enough power on the usb to power properly the soundcard with all channels (active usb hub or external ac adapter)
- usb 1 emulation of your i3 is buggy. Look on the Sony website if you don't have a more recent bios update for your model.

Dont have sony vaio but some hp G62 serie.
I made update of bios and install dvs3 driver without change.

Dont have AC adapter for this sound card. 9v 500mA. In mk2 pack isnt.