Gemini G4V

  

Re: Gemini G4V

Postby sfronti on 30 Nov 2017, 21:55

i mapped locator1 but when i tried to map the sampler pad 1, the locator started to play the track and i got the follow message.

midi.png


Stelios Greece
Image
July 2012 Mixvibes DJ of the Month
Sony Vaio
C.P.U: Intel Core I7, 2.2GHz
Ram:8Gb
V.G.A:Ati Radeon HD 7550M/7650M (2Gb ram)
H.D.D1:SSD 240Gb (Intel)
H.D.D2:1T (7200rpm, 32mb)
Soundcard: Esi UDJ6, Audio4 DJ
O.S:Win 10 Pro 64bit, Win 7 Pro 64bit
Mix Vibes: Cross 3.4.3, 3.3.11
Controller:U-Mix Pro2, Denon MC3000, Vci100 MKII, Faderfox Dj2,


MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
sfronti
 
Posts: 860
Joined: 17 May 2007, 10:16
Location: Athens, Greece


Re: Gemini G4V

Postby FigDJ on 01 Dec 2017, 14:53

The screen and message tells me exactly what I needed to know.

There is no hardware switching between decks and or between pad modes.

Whenever a controller with 8 pads on each side and controls for 4 deck needs to be mapped the hardware configuration from best to really bad is as follows

Best- All hardware switching with layering- It means that there is a channel switch when changing deck and or using the shift key. Also there is a parameter switch for each pad in the different pad modes. Good example Pioneer's line of DDJ controllers

Good- Parameter switch for pads no channel switch for deck.
Example- Hercules P32

OK- Hardware switch for decks, no parameter switch for pads.
Example MC8000.

Bad- no channel switch for decks, no parameter switch for pads.
This case, very hard to map in Cross but not impossible. Cross does not support standard XML mapping which is used to compensate for the lack of hardware.

This type of controller places additional burden on CPU resources by using software for map layering. Depending on the system specs if they are high is OK but if they are low it could be unstable.

Will be starting to map today and will advise on additional testing.
Image
FigDJ
 
Posts: 1284
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Gemini G4V

Postby sfronti on 01 Dec 2017, 15:49

Really appreciate your help. Thank you very much!!!

Stelios, Greece
Image
July 2012 Mixvibes DJ of the Month
Sony Vaio
C.P.U: Intel Core I7, 2.2GHz
Ram:8Gb
V.G.A:Ati Radeon HD 7550M/7650M (2Gb ram)
H.D.D1:SSD 240Gb (Intel)
H.D.D2:1T (7200rpm, 32mb)
Soundcard: Esi UDJ6, Audio4 DJ
O.S:Win 10 Pro 64bit, Win 7 Pro 64bit
Mix Vibes: Cross 3.4.3, 3.3.11
Controller:U-Mix Pro2, Denon MC3000, Vci100 MKII, Faderfox Dj2,


MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
sfronti
 
Posts: 860
Joined: 17 May 2007, 10:16
Location: Athens, Greece


Re: Gemini G4V

Postby FigDJ on 31 Jan 2018, 17:05

OK, I am back and getting back into the swing of things.
Before continuing I want to ask the general question.

Is there someone close to Maryland, US that has this controller?
Having the controller in hand means that I could map this entire controller for 4 decks support and 2 samplers in a week.

Not having the controller at hand can make mapping very difficult specially when a controller (like this one) relies on software layers rather than hardware addresses.
Image
FigDJ
 
Posts: 1284
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Gemini G4V

Postby sfronti on 01 Feb 2018, 15:06

I really hope that there is someone who can make it easier.

Stelios, Greece
Image
July 2012 Mixvibes DJ of the Month
Sony Vaio
C.P.U: Intel Core I7, 2.2GHz
Ram:8Gb
V.G.A:Ati Radeon HD 7550M/7650M (2Gb ram)
H.D.D1:SSD 240Gb (Intel)
H.D.D2:1T (7200rpm, 32mb)
Soundcard: Esi UDJ6, Audio4 DJ
O.S:Win 10 Pro 64bit, Win 7 Pro 64bit
Mix Vibes: Cross 3.4.3, 3.3.11
Controller:U-Mix Pro2, Denon MC3000, Vci100 MKII, Faderfox Dj2,


MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
sfronti
 
Posts: 860
Joined: 17 May 2007, 10:16
Location: Athens, Greece


Re: Gemini G4V

Postby FigDJ on 26 Mar 2018, 13:53

Questions about the VU meters LED from Sfronti
Let's try the easy stuff 1st

The following code in the output section of the file. If you don't know what the output section is let me know and we back track a little.
If the following code does not work there are other ways to do it I am just trying the easy one 1st.
Code: Select all
        <mapping>
          <control alias="fam(Mixer).ChannelAMeter" value="%"/>
          <MIDI type="CC" parameter="0x14" channel="0x3" value="%"/>
        </mapping>
        <mapping>
          <control alias="fam(Mixer).ChannelBMeter" value="%"/>
          <MIDI type="CC" parameter="0x15" channel="0x3" value="%"/>
        </mapping>
        <mapping>
          <control alias="fam(Mixer).ChannelCMeter" value="%"/>
          <MIDI type="CC" parameter="0x16" channel="0x3" value="%"/>
        </mapping>
        <mapping>
          <control alias="fam(Mixer).ChannelDMeter" value="%"/>
          <MIDI type="CC" parameter="0x17" channel="0x3" value="%"/>
        </mapping>
        <mapping>
          <control alias="fam(Mixer).MasterMeterLeft " value="%"/>
          <MIDI type="CC" parameter="0x18" channel="0x3" value="%"/>
        </mapping>
        <mapping>
          <control alias="fam(Mixer).MasterMeterRight " value="%"/>
          <MIDI type="CC" parameter="0x19" channel="0x3" value="%"/>
        </mapping>


Let me know if this works or not. If it doesn't then I have to built the code for it but don't worry there are other options.
Image
FigDJ
 
Posts: 1284
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Gemini G4V

Postby sfronti on 26 Mar 2018, 20:27

I will try it and let you know!!!

Thanks a lot!!!

Stelios
Image
July 2012 Mixvibes DJ of the Month
Sony Vaio
C.P.U: Intel Core I7, 2.2GHz
Ram:8Gb
V.G.A:Ati Radeon HD 7550M/7650M (2Gb ram)
H.D.D1:SSD 240Gb (Intel)
H.D.D2:1T (7200rpm, 32mb)
Soundcard: Esi UDJ6, Audio4 DJ
O.S:Win 10 Pro 64bit, Win 7 Pro 64bit
Mix Vibes: Cross 3.4.3, 3.3.11
Controller:U-Mix Pro2, Denon MC3000, Vci100 MKII, Faderfox Dj2,


MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
sfronti
 
Posts: 860
Joined: 17 May 2007, 10:16
Location: Athens, Greece


Re: Gemini G4V

Postby sfronti on 26 Mar 2018, 21:55

Unfortunately it's not working.
Here is my file to have a look if i put the code correct.

Stelios

G4V FIG.mappings
(74.24 KiB) Downloaded 935 times
Image
July 2012 Mixvibes DJ of the Month
Sony Vaio
C.P.U: Intel Core I7, 2.2GHz
Ram:8Gb
V.G.A:Ati Radeon HD 7550M/7650M (2Gb ram)
H.D.D1:SSD 240Gb (Intel)
H.D.D2:1T (7200rpm, 32mb)
Soundcard: Esi UDJ6, Audio4 DJ
O.S:Win 10 Pro 64bit, Win 7 Pro 64bit
Mix Vibes: Cross 3.4.3, 3.3.11
Controller:U-Mix Pro2, Denon MC3000, Vci100 MKII, Faderfox Dj2,


MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
sfronti
 
Posts: 860
Joined: 17 May 2007, 10:16
Location: Athens, Greece


Re: Gemini G4V

Postby FigDJ on 27 Mar 2018, 14:04

sfronti wrote:Unfortunately it's not working.
Here is my file to have a look if i put the code correct.

Stelios

G4V FIG.mappings

Did you try testing on other than Player A. Your map had a conflicting LED command. The very 1st LED command should be taken out. The ones you added at the bottom of the file are fine.
Take out that command, try again, and let me know.
In the meantime if that doesn't work I am formulating a solution.
Image
FigDJ
 
Posts: 1284
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Gemini G4V

Postby sfronti on 27 Mar 2018, 18:36

I've deleted the very first led command and tested all decks but unfortunately still no luck

Thanks a lot

Stelios, Greece

G4V FIG.mappings
(74.07 KiB) Downloaded 931 times
Image
July 2012 Mixvibes DJ of the Month
Sony Vaio
C.P.U: Intel Core I7, 2.2GHz
Ram:8Gb
V.G.A:Ati Radeon HD 7550M/7650M (2Gb ram)
H.D.D1:SSD 240Gb (Intel)
H.D.D2:1T (7200rpm, 32mb)
Soundcard: Esi UDJ6, Audio4 DJ
O.S:Win 10 Pro 64bit, Win 7 Pro 64bit
Mix Vibes: Cross 3.4.3, 3.3.11
Controller:U-Mix Pro2, Denon MC3000, Vci100 MKII, Faderfox Dj2,


MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
sfronti
 
Posts: 860
Joined: 17 May 2007, 10:16
Location: Athens, Greece


PreviousNext

Return to Mapping Midi




Who is online

Users browsing this forum: No registered users and 2 guests

 
 
   
 
© 2014 Mixvibes