Pioneer XDJ RX POUR Cross

  

Pioneer XDJ RX POUR Cross

Postby Dj Maddox on 20 Apr 2016, 19:10

Bonjour à tous,

Existe-t-il un mapping pour le Pioneer XDJ RX?
Si non, est-il prévu par la team Mixvibes?

Est-ce que quelqu'un à un mapping béta, éventuellement éditable?
Merci pour vos réponses.
User avatar
Dj Maddox
 
Posts: 5
Joined: 10 Feb 2011, 20:50


Re: Pioneer XDJ RX POUR Cross

Postby FigDJ on 20 Apr 2016, 20:04

DJ Maddox wrote:Bonjour à tous,

Existe-t-il un mapping pour le Pioneer XDJ RX?
Si non, est-il prévu par la team Mixvibes?

Est-ce que quelqu'un à un mapping béta, éventuellement éditable?
Merci pour vos réponses.

DJ Maddox wrote:Hello everyone,

Is there a mapping for the Pioneer XDJ RX?
If not, are there plans by Mixvibes team?

Is someone a mapping beta, possibly editable?
Thank you for your answers.

Bien que tous les contrôles peuvent être mappées en utilisant les méthodes existantes de Mixvibes Cross, sorties pour les écrans vidéo ne sont pas pris en charge dans la version actuelle.

Après un examen de tous les documents accessibles au public, je crois devraient être pris en charge via HID les écrans.

Je ne l'ai pas entendu parler de Mixvibes de soutenir ce contrôleur spécifique ou les sorties nécessaires pour gérer les écrans de formes d'onde.

Excusez-moi pour mon français. en utilisant Google translate.

English version
Although all the controls can be mapped using the existing methods from Mixvibes Cross, outputs for the video screens are not supported in the current version.

After an examination of all documentation publicly available I believe the screens would need to be supported via HID.

I have not heard anything from Mixvibes about supporting this specific controller or the outputs needed to handle waveforms screens.

I apologize for my French. using Google translate.
Image
FigDJ
 
Posts: 1225
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Pioneer XDJ RX POUR Cross

Postby Dj Maddox on 23 Apr 2016, 10:13

Hello, thks for your answer.

I have already mapped the controller, but i just wanted to know if there was a better mapping, with leds on/off, info's on screens.

I hope it will come in a near future.

Good WE all
User avatar
Dj Maddox
 
Posts: 5
Joined: 10 Feb 2011, 20:50


Re: Pioneer XDJ RX POUR Cross

Postby FigDJ on 16 Dec 2016, 15:07

DJ Maddox wrote:Hello, thks for your answer.

I have already mapped the controller, but i just wanted to know if there was a better mapping, with leds on/off, info's on screens.

I hope it will come in a near future.

Good WE all


There is a better mapping now that includes the LEDs and most of the screen information. It will post it as soon as I can discuss it with Mixvibes.
Image
FigDJ
 
Posts: 1225
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Pioneer XDJ RX POUR Cross

Postby djwojo on 02 May 2017, 20:58

Is there any progress on mapping for xdj-rx. I just purchased the unit and its not working with Cross. Can anyone help please?
User avatar
djwojo
 
Posts: 48
Joined: 07 Aug 2010, 14:35
Location: Trenton, NJ USA


Re: Pioneer XDJ RX POUR Cross

Postby daniel clark on 02 May 2017, 21:17

:eek: :idea: you just missed figdj ,, give him a minuite ,, :mrgreen:
Image
Image
January 2012 Mixvibes DJ of the month
MEMBER OF:
:cool: C00l People MV Society :cool:

PLEASE REGISTER YOUR SOFTWARE...FORUM RULES
2014 dell XPS8700
intel core i5 4400@3.10ghz
12 gigs DDR3 ram
NVDIA GeForce GT635
Win 10 /64 bits OS
Realteck 7.1
Home USB sound dogle
Asus VE247H monitor
Logitec G-15 ser 1 gaming keyboard
U-Mix Control Pro 2
User avatar
daniel clark
 
Posts: 6702
Joined: 31 Oct 2008, 00:01
Location: Charleston,S C


Re: Pioneer XDJ RX POUR Cross

Postby FigDJ on 03 May 2017, 13:47

Mixvibes has not developed support for screens, or if they have they are yet to release it. I don't get any MIDI map support information from them as I repeatedly have posted questions that have gone without response or even an acknowledgement of receipt.

The only thing I can do on this controller is map commands and LEDs no screens.

Mapping this controller in an incomplete fashion will be against my best judgment and I think my time and effort will be wasted unless I Mixvibes decides to support screens.
Image
FigDJ
 
Posts: 1225
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Pioneer XDJ RX POUR Cross

Postby djwojo on 03 May 2017, 20:08

Thank you for any help you can give me. I have been using mixvibes video for over 7 years and do not want to stop. The controller is great in that it has usb ports just in case the computer freezes up and also you can make great live mix of your gig at the same time
Independent of the computer. It would be great to add this to the controler line up as it is very similar in operation to the cdjs and the mixer partnis almost like miniature djm 900.
Any help would be appreciated

Than you everyone
User avatar
djwojo
 
Posts: 48
Joined: 07 Aug 2010, 14:35
Location: Trenton, NJ USA


Re: Pioneer XDJ RX POUR Cross

Postby FigDJ on 03 May 2017, 20:50

Referencing a PM that you send me I understand that you have not got the LEDs to work.

OK the 1st thing that you must do is take a look at the following document listing the MIDI messages.
XDJ-RX_List_of_MIDI_Message_E.pdf
(305.73 KiB) Downloaded 847 times

I am going to use the Play/pause button for deck #1 as the example.

In the document it list the button as being available for channels 1,2,3 and 4 with a note of 0 and 34 when pressing the shift button.
Open the .mappings file in a text editor.
The .mappings file for your controller has the following sections:
Code: Select all
<main>
  <version major="1" minor="0"/>
  <controller kind="MIDI">
    <id ID="4294169115"/>

(different for every controller, auto detected by Cross)
Code: Select all
    <properties Model="XDJ-RX" Manufacturer="Pioneer" Version="3.3.4" Publisher="FigDj"
                PCDevice="Pioneer XDJ-RX" MacDevice="Pioneer XDJ-RX" HiRes="on"/>
Information in the comment when you create the map.
Code: Select all
<icon Data=""/>

That is information regarding the Icon displayed with your map. You can import a graphic depicting your particular controller. It looks like garbled data.
Code: Select all
    <mappings>
      <input-mappings>
here is where the mapping commands start. This section is for command from the controller to the software. So it is input to the software. And here is where your command for play/pause resides.
It looks like the code below which can be auto-generated by the MIDI learn function in Cross.
Code: Select all
        <mapping name="PLAY/PAUSE">
          <events>
            <MIDI type="Note" parameter="0x0" channel="0x1"/>
          </events>
          <controls>
            <control alias="fam(Player)[0x1].PlayPause"/>
          </controls>
          <preset name="Toggler Button">
            <parameters>
              <parameter object="invert" key="on" value="off"/>
            </parameters>
          </preset>
        </mapping>
After all the input commands are done then the document closes the section like below. If you have LED map they go into the output section. This is a node from the software to turn on or off an LED in your controller. If a mapping for LEDs was not previously done this section might be missing.
Code: Select all
      </input-mappings>
      <output-mappings>
Your LED mapping for the Play/pause button have two states on and off. A mapping for every state must be present. This mapping must be done by manually typing the commands as Cross does not have auto-mapping capability for LEDs. It looks as follows:
Code: Select all
        <mapping>
          <control alias="fam(Player)[0x1].PlayPause" value="true"/>
          <MIDI type="Note" parameter="0x0" channel="0x1" value="127"/>
        </mapping>
        <mapping>
          <control alias="fam(Player)[0x1].PlayPause" value="false"/>
          <MIDI type="Note" parameter="0xb" channel="0x1" value="0"/>
        </mapping>

Then it document must close all sections
Code: Select all
      </output-mappings>
    </mappings>
  </controller>
</main>

Hope this can get you started.
Image
FigDJ
 
Posts: 1225
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Pioneer XDJ RX POUR Cross

Postby djwojo on 03 May 2017, 20:59

thank you. will work on it
User avatar
djwojo
 
Posts: 48
Joined: 07 Aug 2010, 14:35
Location: Trenton, NJ USA


Next

Return to Mapping Midi




Who is online

Users browsing this forum: Bing [Bot] and 56 guests

 
 
   
 
© 2014 Mixvibes