Problem mapping lights (dj-tech dragon two)

  

Problem mapping lights (dj-tech dragon two)

Postby ROZE61 on 18 Nov 2015, 13:53

Hi, I have problem mapping for my DJ-TECH dragon two. :(
1) the lights not operate.
The lights work exclusively in the eq zone mixer (bass-mid-treble) + scroll traces knob + light jog (but do not turn) + LED Vmeter master (not the fader left and right). there is a way to make them work all?
2) When using Cross in timecode with my turntables and dragon2 there are problems at the faders.
When I get up they have an uncertainty of volume (lowers and then resumes). This happens at the print line before max level volume.
I hope for some help, please if you can speak simple, my mind is 95% analog and 5% digital :lol: ... Thanks
Last edited by ROZE61 on 28 Nov 2015, 18:03, edited 1 time in total.
User avatar
ROZE61
 
Posts: 74
Joined: 29 Nov 2011, 15:41
Location: Caponago (MB)


Re: Light mapping (dj-tech dragon two)

Postby RoJeC on 18 Nov 2015, 14:30

Likely FigDJ can help you out, at least some further.

What you can do as preparation is to upload your MIDI mapping file.

It would also be (very) helpful if you can upload or link to the MIDI commands table of the device. This table shows which commands the device needs/has for each control.
Ronald

Image

downloads + more forums = Register license(ucp.php?i=169)
Apple store new user? first read viewtopic.php?f=259&t=34199
Manual? In Cross open menu, select Help (available 24/7).
Audio dropouts? Increase audio 'buffer size' value.
FAQ iOS / Android / PC / MAC http://www.mixvibes.com/FAQ/
Soundcard not available/working? Try the 32bit version of Cross (is also installed).
RoJeC
 
Posts: 4473
Joined: 20 May 2011, 07:55
Location: Bussum, Netherlands


Re: Light mapping (dj-tech dragon two)

Postby ROZE61 on 19 Nov 2015, 15:22

Dragon Two midi map 3.pdf
(636.01 KiB) Downloaded 1461 times
Dragon Two midi map 2.pdf
(680.98 KiB) Downloaded 1452 times
Dragon Two midi map 1.pdf
(361.73 KiB) Downloaded 1437 times
Hi Ronald,
Thanks for your help!
I send my mapping and MIDI map dj-tech.
maximum of 3 attachments, I send two messages...
Thanks again and good music :)
Roby
User avatar
ROZE61
 
Posts: 74
Joined: 29 Nov 2011, 15:41
Location: Caponago (MB)


Re: Light mapping (dj-tech dragon two)

Postby ROZE61 on 19 Nov 2015, 15:26

Dragon(Dj Tech).mappings
(43.55 KiB) Downloaded 1578 times
Dragon Two midi map 4.pdf
(560.68 KiB) Downloaded 1448 times
Sending completed
User avatar
ROZE61
 
Posts: 74
Joined: 29 Nov 2011, 15:41
Location: Caponago (MB)


Re: Problem mapping lights (dj-tech dragon two)

Postby ZagaDj on 14 Mar 2018, 04:17

Hi, I downloaded your MIDI mapping for my DJ Tech Dragon Two and it works good.
The only thing that I can't do is to activate the sound in the headphones: the Cues buttons lights of channels A and B are always with light on and when I push one of it to switch on the sound in headphones, the button lights intermittently and the sound does not come. Can you help me please ?
thanks a lot.
ZagaDj
 
Posts: 9
Joined: 07 Jan 2018, 12:56


Re: Problem mapping lights (dj-tech dragon two)

Postby FigDJ on 19 Mar 2018, 14:56

ZagaDj wrote:Hi, I downloaded your MIDI mapping for my DJ Tech Dragon Two and it works good.
The only thing that I can't do is to activate the sound in the headphones: the Cues buttons lights of channels A and B are always with light on and when I push one of it to switch on the sound in headphones, the button lights intermittently and the sound does not come. Can you help me please ?
thanks a lot.


You might get better help with the other user in this thread who I worked with for weeks to map this controller remotely.
When I say remotely it means that I made a map, send it to him.
He would test it and tell me what worked and what didn't. We went back and forth like this for quite some time before it was finally done. However, when it comes to the audio routing, that is something that must be working correctly before any MIDI mapping could work correctly on audio related controls.
I don't have the controller and therefore can't help on that particular. Perhaps someone who downloaded the map and it is working OK with it can help you.
Unless of course a Mixvibes decides to provide some support.
Image
FigDJ
 
Posts: 1292
Joined: 22 Apr 2012, 16:03
Location: Odenton, MD


Re: Problem mapping lights (dj-tech dragon two)

Postby ZagaDj on 24 Mar 2018, 16:15

Ok, thanks a lot.
ZagaDj
 
Posts: 9
Joined: 07 Jan 2018, 12:56



Return to Mapping Midi




Who is online

Users browsing this forum: No registered users and 9 guests

 
 
   
 
© 2014 Mixvibes