Map for New DDJ-SB2
Posted: 23 Oct 2015, 21:10
Latest Update
Update 1.The file now has been load tested and updated. If interested, please download and test. Feedback welcomed.
Update 2. the file is now couple of post below in this thread.
This is my version of the map now that the DDJ-SB2 is 4 deck capable. this map has not been tested, not even load tested. So if import it and it loads great. If it does not loads let me know so i can fix it.
Few thing changed with the controller so I had to get a little creative.
The back button was deleted
The 3 and 4 buttons on the side are used to switch players
A Trans pad button was added
1. The button labeled 3 in the FX sections is a logic modifier
There are 2 one on the left and one on the right.
So, Button #3 in FX section +
Browse Knob= BrowseSampleBankList
Push Browse knob= LoadSelectedSampleBank
LEFT LOAD (While on player 1) = (P1)TimeDisplayMode
LEFT LOAD (While on player 3) = (P3)TimeDisplayMode
RIGHT LOAD (While on player 2) = (P2)TimeDisplayMode
RIGHT LOAD (While on player 4) = (P4)TimeDisplayMode
-------------------------------------------
While using 4 decks and 0 samplers
LEFT LOAD (While on player 1) = LoadInPlayerA
SHIFT+ LEFT LOAD (While on player 1) =(P1)ReloadAsCloneOfMaster
LEFT LOAD (While on player 3) = LoadInPlayerC
SHIFT+ LEFT LOAD (While on player 3) =(P3)ReloadAsCloneOfMaster
RIGHT LOAD (While on player 2) = LoadInPlayerB
SHIFT+ RIGHT LOAD (While on player 2) =
(P2)ReloadAsCloneOfMaster
RIGHT LOAD (While on player 4) = LoadInPlayerD
SHIFT+ RIGHT LOAD (While on player 4) =
(P4)ReloadAsCloneOfMaster
While using 2 decks and 2 samplers
or 3 decks and 1 sampler
LEFT LOAD (While on player 1) = LoadInPlayerA
SHIFT+ LEFT LOAD (While on player 1) =(P1)ReloadAsCloneOfMaster
LEFT LOAD (While on player 3) = (S1)LoadSelectedSampleBank
SHIFT+ LEFT LOAD (While on player 3) = BrowseSampleBankList
RIGHT LOAD (While on player 2) = LoadInPlayerB
SHIFT + RIGHT LOAD (While on player 2) =
(P2)ReloadAsCloneOfMaster
RIGHT LOAD (While on player 4) = (S2)LoadSelectedSampleBank
SHIFT + RIGHT LOAD (While on player 4) = BrowseSampleBankList
-----------------------------------------------------
Shift + TRANS PAD= MatchKeyWithMaster
When the key does not match with master it will blink.
--------------------------------------------------------
the 3 and 4 button are used to switch decks 3 and 4 for samplers 1 and 2
Shift +3= SwitchSamplerPlayerC
Shift +4= SwitchSamplerPlayerD
-------------------------------------------------------
On any deck (Vinyl on )
If you touch and rotate the wheel while pressing shift the deck respond to as a smartseek which allows you to scrub the track.
-------------------------------------------------------
FX Sections
Button 1= Fx OnOff
Shift + Button 1 = FX SELECT
Button 2 = FX INPUT CHANNEL
Shift + Button2= AudioVideoFxSwitch
Button 3 = Shift logic1 (remember to use for special fuctions)
Shift+ Button 3= Sampler1MixerType
----------------------------------------
Please test and let me know how it goes.
Update 1.The file now has been load tested and updated. If interested, please download and test. Feedback welcomed.
Update 2. the file is now couple of post below in this thread.
This is my version of the map now that the DDJ-SB2 is 4 deck capable. this map has not been tested, not even load tested. So if import it and it loads great. If it does not loads let me know so i can fix it.
Few thing changed with the controller so I had to get a little creative.
The back button was deleted
The 3 and 4 buttons on the side are used to switch players
A Trans pad button was added
1. The button labeled 3 in the FX sections is a logic modifier
There are 2 one on the left and one on the right.
So, Button #3 in FX section +
Browse Knob= BrowseSampleBankList
Push Browse knob= LoadSelectedSampleBank
LEFT LOAD (While on player 1) = (P1)TimeDisplayMode
LEFT LOAD (While on player 3) = (P3)TimeDisplayMode
RIGHT LOAD (While on player 2) = (P2)TimeDisplayMode
RIGHT LOAD (While on player 4) = (P4)TimeDisplayMode
-------------------------------------------
While using 4 decks and 0 samplers
LEFT LOAD (While on player 1) = LoadInPlayerA
SHIFT+ LEFT LOAD (While on player 1) =(P1)ReloadAsCloneOfMaster
LEFT LOAD (While on player 3) = LoadInPlayerC
SHIFT+ LEFT LOAD (While on player 3) =(P3)ReloadAsCloneOfMaster
RIGHT LOAD (While on player 2) = LoadInPlayerB
SHIFT+ RIGHT LOAD (While on player 2) =
(P2)ReloadAsCloneOfMaster
RIGHT LOAD (While on player 4) = LoadInPlayerD
SHIFT+ RIGHT LOAD (While on player 4) =
(P4)ReloadAsCloneOfMaster
While using 2 decks and 2 samplers
or 3 decks and 1 sampler
LEFT LOAD (While on player 1) = LoadInPlayerA
SHIFT+ LEFT LOAD (While on player 1) =(P1)ReloadAsCloneOfMaster
LEFT LOAD (While on player 3) = (S1)LoadSelectedSampleBank
SHIFT+ LEFT LOAD (While on player 3) = BrowseSampleBankList
RIGHT LOAD (While on player 2) = LoadInPlayerB
SHIFT + RIGHT LOAD (While on player 2) =
(P2)ReloadAsCloneOfMaster
RIGHT LOAD (While on player 4) = (S2)LoadSelectedSampleBank
SHIFT + RIGHT LOAD (While on player 4) = BrowseSampleBankList
-----------------------------------------------------
Shift + TRANS PAD= MatchKeyWithMaster
When the key does not match with master it will blink.
--------------------------------------------------------
the 3 and 4 button are used to switch decks 3 and 4 for samplers 1 and 2
Shift +3= SwitchSamplerPlayerC
Shift +4= SwitchSamplerPlayerD
-------------------------------------------------------
On any deck (Vinyl on )
If you touch and rotate the wheel while pressing shift the deck respond to as a smartseek which allows you to scrub the track.
-------------------------------------------------------
FX Sections
Button 1= Fx OnOff
Shift + Button 1 = FX SELECT
Button 2 = FX INPUT CHANNEL
Shift + Button2= AudioVideoFxSwitch
Button 3 = Shift logic1 (remember to use for special fuctions)
Shift+ Button 3= Sampler1MixerType
----------------------------------------
Please test and let me know how it goes.