by n2ma on 12 May 2015, 13:03
Hey guys,
I am trying to get my CMP 800 to work with Cross. Input Mapping is working quiet well but Outputmapping is a little frustrating. Does Anbody have a mapping perhaps? My main concern is the illumination of the jogwheel. Like on cdjs (e.g. 400) there is a light circling oround the wheel when the music plays. I want it to do this also in Midimode. Any ideas? + The cue button lights up but only when the track is playing: I want it to flash when the track is loaded just like it does in the software. Any ideas? Thanks in advance
Nico
-
n2ma
-
- Posts: 126
- Joined: 28 Jan 2008, 00:25
- Location: Nürnberg
-
by n2ma on 12 May 2015, 15:14
Allright Thank you. Here you can find the MIDI table http://www.stantondj.com/pdf/manuals/CMP800%20manual_English.pdfAnd here is the mapping as far as important. Input - Code: Select all
<mappings> <input-mappings> <mapping> <events> <MIDI type="Note" parameter="0x2" channel="0x1"/> </events> <controls> <control alias="fam(Player)[0x1].PlayPause"/> </controls> <preset name="Toggler Button"> <parameters> <parameter object="invert" key="on" value="off"/> </parameters> </preset> </mapping> <mapping> <events> <MIDI type="Note" parameter="0x2e" channel="0x1"/> </events> <controls> <control alias="fam(Player)[0x1].Cue"/> </controls> <preset name="Holder Button"> <parameters> <parameter object="invert" key="on" value="off"/> </parameters> </preset> </mapping> <mapping> <events> <MIDI type="Note" parameter="0x14" channel="0x1"/> </events> <controls> <control alias="fam(Player)[0x1].Locator1Control"/> </controls> <preset name="Toggler Button"> <parameters> <parameter object="invert" key="on" value="off"/> </parameters> </preset> </mapping> <mapping> <events> <MIDI type="Note" parameter="0x14" modifiers="ML2" channel="0x1"/> </events> <controls> <control alias="fam(Player)[0x1].Locator1Clear"/> </controls> <preset name="Trigger Button"> <parameters> <parameter object="metronom" key="Repeat Acceleration" value="0.1"/> <parameter object="metronom" key="Repeat Time" value="0"/> <parameter object="metronom" key="Start Time" value="500"/> </parameters> </preset> </mapping>
And here the output: - Code: Select all
<output-mappings> <mapping> <control alias="fam(Player)[0x1].PlayPause" value="true"/> <MIDI type="Note" parameter="0x2" channel="0x1" value="127"/> </mapping> <mapping> <control alias="fam(Player)[0x1].PlayPause" value="false"/> <MIDI type="Note" parameter="0x2" channel="0x1" value="0"/> </mapping> <mapping> <control alias="fam(Player)[0x1].BeatFlash" value="true"/> <MIDI type="Note" parameter="0x2e" channel="0x1" value="127"/> </mapping> <mapping> <control alias="fam(Player)[0x1].BeatFlash" value="false"/> <MIDI type="Note" parameter="0x2e" channel="0x1" value="0"/> </mapping> </mapping> <mapping> <control alias="fam(Player)[0x1].Locator1Control" value="true"/> <MIDI type="CC" parameter="0x14" channel="0x1" value="127"/> </mapping> <mapping> <control alias="fam(Player)[0x1].Locator1Control" value="false"/> <MIDI type="CC" parameter="0x14" channel="0x1" value="0"/> </mapping> <mapping> <control alias="fam(Player)[0x1].Locator1Control" value="true" modifiers="ML2"/> <MIDI type="CC" parameter="0x14" channel="0x1" value="127"/> </mapping> <mapping> <control alias="fam(Player)[0x1].Locator1Control" value="false" modifiers="ML2"/> <MIDI type="CC" parameter="0x14" channel="0x1" value="0"/> </mapping> </output-mappings>
I also posted the one locator as an example because the lights do not work as i want them to though I just adapted the code from another mididevie of mine where it works...
-
n2ma
-
- Posts: 126
- Joined: 28 Jan 2008, 00:25
- Location: Nürnberg
-
by n2ma on 31 Oct 2015, 14:58
Hi,
unfortunatelly FigDJ does not respond any more. can anybody else help me?
Cheers
-
n2ma
-
- Posts: 126
- Joined: 28 Jan 2008, 00:25
- Location: Nürnberg
-
by daniel clark on 31 Oct 2015, 15:21
n2ma wrote:Hi,
unfortunatelly FigDJ does not respond any more. can anybody else help me?
Cheers figdj is a Cross/mixvibes usurer /moderator ,, lack of response is probably because of commitments for his professional life ,, not saying he unavailable ,,but usually when his time constraints allow he is very helpful ,, and your best bet on a solution ,, so if you can be patient it should work out ,,unless you hear otherwise from him
January 2012 Mixvibes DJ of the month MEMBER OF: C00l People MV Society 2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-
daniel clark
-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by FigDJ on 31 Oct 2015, 18:21
daniel clark wrote: figdj is a Cross/mixvibes usurer /moderator ,, lack of response is probably because of commitments for his professional life ,, not saying he unavailable ,,but usually when his time constraints allow he is very helpful ,, and your best bet on a solution ,, so if you can be patient it should work out ,,unless you hear otherwise from him
Thank you for the cover Daniel. To n2ma The reason why your output map doesn't work is because you selected "CC" as a MIDI type within your command. If you reference the column al the way to the right in the MIDI table that you provided. You can find comments on what commands are "cc" and which are not. The way the table is composed, if there is not a "cc" comment, then the command is a note. Normally "cc" command are for knob and faders while "note" command are for buttons. Example: Your code - Code: Select all
<mapping> <control alias="fam(Player)[0x1].Locator1Control" value="true"/> <MIDI type="CC" parameter="0x14" channel="0x1" value="127"/> </mapping> <mapping> <control alias="fam(Player)[0x1].Locator1Control" value="false"/> <MIDI type="CC" parameter="0x14" channel="0x1" value="0"/> </mapping>
should read - Code: Select all
<mapping> <control alias="fam(Player)[0x1].Locator1Control" value="true"/> <MIDI type="note" parameter="0x14" channel="0x1" value="127"/> </mapping> <mapping> <control alias="fam(Player)[0x1].Locator1Control" value="false"/> <MIDI type="note" parameter="0x14" channel="0x1" value="0"/> </mapping>
Notice that instead of ""cc" is "note"
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by FigDJ on 31 Oct 2015, 20:17
I forgot to mention that to get the cue button to respond correctly with the blinking you need 3 commands. Example - Code: Select all
<mapping> <control alias="fam(Player)[0x1].CueStateOutput" value="0"/> <MIDI type="Note" parameter="0x1" channel="0x1" value="0"/> </mapping> <mapping> <control alias="fam(Player)[0x1].CueStateOutput" value="1"/> <MIDI type="Note" parameter="0x1" channel="0x1" value="127"/> </mapping> <mapping> <control alias="fam(Player)[0x1].CueStateOutput" value="2"/> <MIDI loop="true"/> <MIDI type="Note" parameter="0x1" channel="0x1" value="127" duration="500"/> <MIDI type="Note" parameter="0x1" channel="0x1" value="0" duration="500"/> </mapping>
That is just an example. you have to make sure that the parameter and channel are correct for your controller.
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by n2ma on 03 Nov 2015, 14:55
Nice One! I'd give you +1000 karma if it still existed (and if I had the admin rights of course) here You code works perfectly! The Locator LEDs now light up in blue. Do you know which value to tweak to get them back to red? Any ideas for the needlepostion led around the jog? the whole jog lights up when the platter is touched in MIDI mode without any mapping to it. Is it possible that it is not MIDI mappable? Do you know any tutorial for MIDI code writing (especially outputs)? Unfortunatelly I do not understand the code in total so that further help calls are probable... Anyway, thank you a lot so far!!!!
-
n2ma
-
- Posts: 126
- Joined: 28 Jan 2008, 00:25
- Location: Nürnberg
-
by daniel clark on 03 Nov 2015, 23:34
n2ma wrote:Nice One! I'd give you +1000 karma if it still existed (and if I had the admin rights of course) here You code works perfectly! Anyway, thank you a lot so far!!!! yes remember karma points ,,got three U-Mix Control Pro s with it
January 2012 Mixvibes DJ of the month MEMBER OF: C00l People MV Society 2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-
daniel clark
-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
Return to Mapping Midi
Users browsing this forum: No registered users and 113 guests
|
|
|