My controller has two led sequences on the jog wheels
normal playback
- Code: Select all
<mapping name="LED DECK A JOG">
<control alias="fam(Player)[0x1].PlayerPositionInMs" value="%1800"/>
<MIDI simpleMap="true"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="1"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="2"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="3"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="4"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="5"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="6"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="7"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="8"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="9"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="10"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="11"/>
<MIDI type="cc" parameter="0x3d" channel="0x2" value="12"/>
</mapping>
and track ending
- Code: Select all
<mapping name="LED DECK A END OF TRACK ALARM">
<control alias="fam(Player)[0x1].EndOfTrackAlarm" value="true"/>
<MIDI loop="true"/>
<MIDI type="cc" parameter="0x3c" channel="0x2" value="6" duration="300"/>
<MIDI type="cc" parameter="0x3c" channel="0x2" value="5" duration="300"/>
<MIDI type="cc" parameter="0x3c" channel="0x2" value="4" duration="300"/>
<MIDI type="cc" parameter="0x3c" channel="0x2" value="3" duration="300"/>
<MIDI type="cc" parameter="0x3c" channel="0x2" value="2" duration="300"/>
<MIDI type="cc" parameter="0x3c" channel="0x2" value="1" duration="300"/>
</mapping>
how to tell Cross to stop sending normal playback MIDI out?
also in the duration parameter can I specify beats or have it sync to MIDI clock?
All help is appreciated,
Many thanks,
Ash
