ddjj wrote:Hello:
This question is probably geared towards FigDj (who is the master of MIDI mapping the Quneo)....I have pretty much the basics down on how to do some of the mapping...I need to know how to light up the two "rings" on the left hand side to emulate the beat clock, or maybe use somehow the beatflash to possibly match the beatgrid with them? Any suggestions?
Thanks
DDJJ
I had asked for the beatclock output to Mixvibes several times and have gotten no response. Right now the only way to light up the ring is use one of the sample pads needle search output to be send to the ring.
Just as a test I took a 16 beat sample needle search output from pad1. Synced the pad to the master slave and muted the pad. The result lights up the ring with the beat going around in 16bbeat cycles. This would be solved if we had a master clock output in normal CC.
As far as the beatflash, here is a test and if you like it I tell you how to do it for all 4 players.
Select a pad
Send the beatflash output from player 1 to it to light up the green LEDs.
Send beatflash output from player 2 to the same pad but to light up the red LEDs.
If you have both players running the pad will be blinking alternative from green to red and back.
The moment that the 2 tracks in the players are perfectly in sync the pad will blink orange until they come out of sync.