P_Jean wrote:So then, can I use multiple MIDI messages with a MIDI loop to control different LEDs but with the same command value?
No , you can't ...
Cross uses the last message.[quote]
In this case the LED does not get updated with th next command.
What I am thinking is
Blink command for 4c on value 2
Blink command for 70 on value 2, 4c doesn't turn off
Blink command for 4e on value 2, 4c and 70 still blinking
blink command for 72 on value 2, 4c, 70 and 4e are still blinking
regular on/off command to turn off 50,54,52, and 56 on value 2.
I am going to say lots of stuff that you already know for the purpose of explaining my thinking. Taking into account tour tip which I appreciate very much.
fo fx integer command
1= Master
2= Channel 1
3= Channel 2
4= Channel 3
5= Channel 4
For FX1 unit
All LEDs are on channel 7 except #48 which is on channel 5 for FX1 and channel 6 for FX 2
On integer =1
1 blink command for 48
1 on/off comand to turn off 4c,70,4e,72,50,54,52 and 56
Now set integer =2
1 on/off comand to turn off 50,54,52, 56,48
and turn on 4c,70,4e, 72
Now set integer =3
1 on/off comand to turn off on 4c,70,4e, 72,48
and turn on 50,54,52,56
Now set integer =4
1blink command for 4c
1blink command for 70
1blink command for 4e
1blink command for 72
1 on/off comand to turn off 50,54,52 and 56
Now set integer =5
1blink command for 50
1blink command for 54
1blink command for 52
1blink command for 56
1 on/off comand to turn off 4c,70,4e and 72
On FX2
On integer =1
1 blink command for 48
1 on/off comand to turn off 4d,71,4f,73,51,55,53 and 57
Now set integer =2
1 on/off comand to turn off 51,55,53, 57,48
and turn on 4d,71,4f, 73
Now set integer =3
1 on/off comand to turn off 4c,70,4e, 72,48
and turn on 51,55,53,57
Now set integer =4
1blink command for 4d
1blink command for 71
1blink command for 4f
1blink command for 73
1 on/off comand to turn off 51,55,53 and 57
Now set integer =5
1blink command for 51
1blink command for 55
1blink command for 53
1blink command for 57
1 on/off comand to turn off 4f,73,4f and 73
I tested this using a Quneo controller but that was using different parameter and channels. the ones I just listed are for the DDJ-SR.
If you have a better idea you are of course welcome to join the game.