american audio dv2 mixer (MIDI) mapping

  

american audio dv2 mixer (MIDI) mapping

Postby djdubc on 06 Jun 2013, 02:48

DV2(Ameican Audio).zip
https://soundcloud.com/djdubceast49

MacBook Pro 9,2 (13-inch, Mid 2012)
Intel core i5-3210M @ 2.5 GHz
8GB DDR3-12800S 1600MHz RAM
Intel HD 4000 1536 MB
1TB 5400 RPM HDD
macOS High Sierra 10.13
Mixvibes Cross 3.4.3
User avatar
djdubc
 
Posts: 322
Joined: 01 Aug 2010, 19:54
Location: NYC


Re: american audio dv2 mixer (MIDI) mapping

Postby P_Jean on 07 Jun 2013, 13:29

I don't have the Mixer ... but with the manual ... i think this code is OK ...
Put it in your ouput-mappings.

this code is for the master led, you can change "MasterMeterLeft" or "right"to put the channel you want ...

good test
Code: Select all
<mapping>
<control alias="fam(Mixer).MasterMeterLeft" value="%"/>
<MIDI fillingMap="true"/>
<MIDI type="CC" parameter="0x0" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x1" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x2" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x3" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x4" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x5" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x6" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x7" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x8" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x9" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0xa" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x0" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x1" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x2" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x3" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x4" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x5" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x6" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x7" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x8" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x9" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0xa" channel="0xf" value="0"/>
</mapping>
<mapping>
<control alias="fam(Mixer).MasterMeterRight" value="%"/>
<MIDI fillingMap="true"/>
<MIDI type="CC" parameter="0x0" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x1" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x2" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x3" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x4" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x5" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x6" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x7" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x8" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x9" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0xa" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x0" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x1" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x2" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x3" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x4" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x5" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x6" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x7" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x8" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x9" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0xa" channel="0xa" value="0"/>
</mapping>
User avatar
P_Jean
 
Posts: 2437
Joined: 09 Dec 2009, 16:24


Re: american audio dv2 mixer (MIDI) mapping

Postby djdubc on 07 Jun 2013, 21:13

thank u, i will try it later on :D :eek: i hope this works.....
https://soundcloud.com/djdubceast49

MacBook Pro 9,2 (13-inch, Mid 2012)
Intel core i5-3210M @ 2.5 GHz
8GB DDR3-12800S 1600MHz RAM
Intel HD 4000 1536 MB
1TB 5400 RPM HDD
macOS High Sierra 10.13
Mixvibes Cross 3.4.3
User avatar
djdubc
 
Posts: 322
Joined: 01 Aug 2010, 19:54
Location: NYC


Re: american audio dv2 mixer (MIDI) mapping

Postby djdubc on 21 Jun 2013, 09:33

ok......it works...but the master level LEDs are waaaaaaaayyyyyyyyy to loud and stay clipped the whole time, i basically have to turn the master and the gain to almsot zero to get an actual reading :redface: what can i do to get the right level(s)? :eek:
https://soundcloud.com/djdubceast49

MacBook Pro 9,2 (13-inch, Mid 2012)
Intel core i5-3210M @ 2.5 GHz
8GB DDR3-12800S 1600MHz RAM
Intel HD 4000 1536 MB
1TB 5400 RPM HDD
macOS High Sierra 10.13
Mixvibes Cross 3.4.3
User avatar
djdubc
 
Posts: 322
Joined: 01 Aug 2010, 19:54
Location: NYC


Re: american audio dv2 mixer (MIDI) mapping

Postby djreff on 10 Jul 2013, 03:56

djdubc wrote:ok......it works...but the master level LEDs are waaaaaaaayyyyyyyyy to loud and stay clipped the whole time, i basically have to turn the master and the gain to almsot zero to get an actual reading :redface: what can i do to get the right level(s)? :eek:



any update on the leds????
DJ reff
PC intel PC intel i7 3770k cpu @3.50ghz 8 gig ram mix vibe cross- denon MCX 8000 controller, with more than 40000dance tracks
User avatar
djreff
 
Posts: 181
Joined: 01 Sep 2009, 01:53


Re: american audio dv2 mixer (MIDI) mapping

Postby djdubc on 10 Jul 2013, 14:32

not yet :eek: im still trying to figure out how to cut down the range of LED's to my mixer...it all comes out the same way, the formula is right but the end result is always way off (always clipping) :redface: i think im missing something....
https://soundcloud.com/djdubceast49

MacBook Pro 9,2 (13-inch, Mid 2012)
Intel core i5-3210M @ 2.5 GHz
8GB DDR3-12800S 1600MHz RAM
Intel HD 4000 1536 MB
1TB 5400 RPM HDD
macOS High Sierra 10.13
Mixvibes Cross 3.4.3
User avatar
djdubc
 
Posts: 322
Joined: 01 Aug 2010, 19:54
Location: NYC


Re: american audio dv2 mixer (MIDI) mapping

Postby djdubc on 23 Jul 2013, 03:00

i think i know what the problem is :eek: the asio driver for the dv2 does not have a volume control for it and the volume is waaaay to loud, the VU meters work as they should but i have to adjust the master and channel fader to 2 in order to get the right reading but its not loud in the speaker :redface: i gotta talk to aa about this
https://soundcloud.com/djdubceast49

MacBook Pro 9,2 (13-inch, Mid 2012)
Intel core i5-3210M @ 2.5 GHz
8GB DDR3-12800S 1600MHz RAM
Intel HD 4000 1536 MB
1TB 5400 RPM HDD
macOS High Sierra 10.13
Mixvibes Cross 3.4.3
User avatar
djdubc
 
Posts: 322
Joined: 01 Aug 2010, 19:54
Location: NYC


Re: american audio dv2 mixer (MIDI) mapping

Postby djdubc on 12 Jan 2014, 09:25

talked to aa and told me that they dont have volume meters and im basically stuck so i have to wait on mixvibes to make a variable :redface: dont know how long thats gon take smh
https://soundcloud.com/djdubceast49

MacBook Pro 9,2 (13-inch, Mid 2012)
Intel core i5-3210M @ 2.5 GHz
8GB DDR3-12800S 1600MHz RAM
Intel HD 4000 1536 MB
1TB 5400 RPM HDD
macOS High Sierra 10.13
Mixvibes Cross 3.4.3
User avatar
djdubc
 
Posts: 322
Joined: 01 Aug 2010, 19:54
Location: NYC



Return to Mapping Midi




Who is online

Users browsing this forum: No registered users and 8 guests

 
 
   
 
© 2014 Mixvibes