american audio dv2 mixer (MIDI) mapping

[djdubc]

DV2(Ameican Audio).zip

[P_Jean]

I don't have the Mixer ... but with the manual ... i think this code is OK ...
Put it in your ouput-mappings.

this code is for the master led, you can change "MasterMeterLeft" or "right"to put the channel you want ...

good test

Code: Select all

<mapping>
<control alias="fam(Mixer).MasterMeterLeft" value="%"/>
<MIDI fillingMap="true"/>
<MIDI type="CC" parameter="0x0" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x1" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x2" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x3" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x4" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x5" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x6" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x7" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x8" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x9" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0xa" channel="0xf" value="127"/>
<MIDI type="CC" parameter="0x0" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x1" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x2" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x3" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x4" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x5" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x6" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x7" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x8" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0x9" channel="0xf" value="0"/>
<MIDI type="CC" parameter="0xa" channel="0xf" value="0"/>
</mapping>
<mapping>
<control alias="fam(Mixer).MasterMeterRight" value="%"/>
<MIDI fillingMap="true"/>
<MIDI type="CC" parameter="0x0" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x1" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x2" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x3" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x4" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x5" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x6" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x7" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x8" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x9" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0xa" channel="0xa" value="127"/>
<MIDI type="CC" parameter="0x0" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x1" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x2" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x3" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x4" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x5" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x6" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x7" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x8" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0x9" channel="0xa" value="0"/>
<MIDI type="CC" parameter="0xa" channel="0xa" value="0"/>
</mapping>

[djdubc]

thank u, i will try it later on i hope this works.....

[djdubc]

ok......it works...but the master level LEDs are waaaaaaaayyyyyyyyy to loud and stay clipped the whole time, i basically have to turn the master and the gain to almsot zero to get an actual reading what can i do to get the right level(s)?

[djreff]

ok......it works...but the master level LEDs are waaaaaaaayyyyyyyyy to loud and stay clipped the whole time, i basically have to turn the master and the gain to almsot zero to get an actual reading what can i do to get the right level(s)?

any update on the leds????

[djdubc]

not yet im still trying to figure out how to cut down the range of LED's to my mixer...it all comes out the same way, the formula is right but the end result is always way off (always clipping) i think im missing something....

[djdubc]

i think i know what the problem is the asio driver for the dv2 does not have a volume control for it and the volume is waaaay to loud, the VU meters work as they should but i have to adjust the master and channel fader to 2 in order to get the right reading but its not loud in the speaker i gotta talk to aa about this

[djdubc]

talked to aa and told me that they dont have volume meters and im basically stuck so i have to wait on mixvibes to make a variable dont know how long thats gon take smh