Mixvibes Dj Community old forum

I purchased Cross DJ Pro last night on my Samsung S8+ running Android 7.0. I have the wego2 hooked up via OTG through a powered USB hub. The app sees the wego and the controller works however I am unable to get the pre-cueing to come out of the headphone jack on the wego. I have gone into the advanced settings and tried all 3 modes (though it sounds like dual is what I want). With dual selected I find that when I turn on the cue on the second deck it actually comes out the master out of the wego even if the cross-fader and/or channel fader is off for that deck.

I'll try it on my 2nd gen Nexus 7 tablet tonight and see if the behavior is any different.

Might it be the channels have to be swapped.

The Cue channels can have the Cue signal mixed with the Main signal, depending on the position of the mix fader.

Also please check if the faders in the screen are linked to the controller. Depending on the controller and/or MIDI mapping it's not possible for the device to set the values in sync upon linking the decice, but you'll have to move the faders to have the device pick up the position.

I tested on the Nexus 7 last night and the pre-cueing works perfectly though the headphone jack on the wego. So there must be something specific about the S8+ and/or Samsungs android build. I did see another thread somewhere about how Samsung uses their own audio driver instead of the default Android one, so maybe thats it? Is there any workaround to that?

The only issue I've found with using the wego2 with Cross DJ Pro is when adjusting the pitch on the controller it seems to not register right away in the app then suddenly jumps which makes it pretty much impossible to make fine pitch adjustments. Is there anyway to tweak this?