Page 38 of 39

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 09 Apr 2017, 13:45
by FigDJ
Fully mapped Pioneer DDJ-SZ2 shown functioning with Cross and Serato at the same time.
Interchangeable to
1. main = Cross backup=Serato
2. main = Serato backup= Cross
3. either side for transition between the 2 software packages.
IMG_1068.JPG

IMG_1074.JPG

IMG_1073.JPG

IMG_1072.JPG

Next Rekordbox map.

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 09 Apr 2017, 13:51
by daniel clark
:idea: impressive figdj ,,
:?: you got the issues with sound routing straightened out ,, :?:
never got any feed back ,, :cool:

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 09 Apr 2017, 14:08
by FigDJ
daniel clark wrote::idea: impressive figdj ,,
:?: you got the issues with sound routing straightened out ,, :?:
never got any feed back ,, :cool:

Sorry about that Daniel. It must be used with external Mixer. The MIDI map is a little bit different but it all works now. Thanks.

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 09 Apr 2017, 14:11
by daniel clark
:idea: kool
guess this will get figured out in the future
probly has too do with the ability too rewire the software inputs :?:

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 23 Aug 2017, 19:04
by FigDJ
The evolution of my DJ Booth

1st generation
A ROG Laptop
UMCP-2
Originally I mapped the UMCP-2 to control 4 decks. However, that turned out to be a bit cumbersome. Once I started using 4 decks and all the Sampler pads I added the Quneo controllers.
2 Quneo controllers using 2 Crane stands. Used these to controll additional pads and video functions.
2 tiny generic monitor speakers.
Everything was set on top of a 12U rack that had a seconday Mixer and power management and storage drawers.
1st Booth.JPG

2nd generation
Got a 5 feet Odessey DJ table
A 6 feet 2 feet deep facade which I modified with LED lights
Got a DDJ-SX
A Samsumg 20 inch monitor in the center
A second computer to handle alternate video and also act as a backup system using the UMCP-2 and a DDJ-SP1.
IO Gear switch TX/RX to handle video source switching between Cross Video output and alternate video.
2nd LEDs Inside Center.JPG

2nd LEDs Inside Left.JPG

2nd LEDs Inside Right.JPG

2nd LEDs Left to right.JPG

2nd LEDs Outside Blue.JPG

2nd LEDs Outside Purple.JPG

3rd Generation
I was not quite happy with the LEDs, so I added extra backing for better reflection and high density LEDs.
2nd to 3rd LEDs Outside Cyan.JPG
2nd to 3rd LEDs Outside Blue.JPG

3rd LEDs Outside Blue.JPG
3rd LEDs Outside Purple.JPG

3rd LEDs Outside Red.JPG

4th generation
I sold the DDJ-SX and got a DDJ-SZ2.
Now I could switch between Serato, Cross, VDJ and Rekordbox.
4th DDJ SZ2 Cross L Serato R Full W New LEDs.JPG

4th DDJ SZ2 Cross L Serato R Full W New LEDs2.JPG

4th DDJ SZ2 Cross L Serato R Full.JPG
4th DDJ SZ2 Cross L Serato R.JPG
4th DDJ SZ2 Cross L Serato R2.JPG
4th DDJ SZ2 Cross R Serato L Center W New LEDs.JPG

4th DDJ SZ2 Serato R.JPG

4th LEDs Inside Center.JPG

4th LEDs Inside from left.JPG

4th LEDs Inside from right.JPG

5th generation
It was getting a little crowded on the tabletop. So I moved the 2 laptops to underneath the table.
Got 2 more monitors.
Got a switching bluetooth keyboard.
Mounted some hardware to hold microphone, iPhone or iPad for controlling lights in DMX and one Quneo controller which I hope to use to control Remix Video If I ever get that working correctly.
5th Center.JPG

5th Full Left View.JPG

5th Full Left w Serato.JPG

5th Full Right View.JPG

5th Full Right w Serato.JPG

5th Left Side.JPG

5th Left w Ku.JPG

5th Right Side.JPG

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 23 Aug 2017, 21:50
by daniel clark
:eek: you are a beast figdj,,
just curious as to whats going on with remixvideo :idea: :?:

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 23 Aug 2017, 22:00
by FigDJ
It crashes upon start. it doesn't stay up long enough to do anything. it is only happening on my secondary computer which I use for backup or to control alternate video.

I want to in "normal operation"
use computer #1 for DJ software.
use computer #2 for alternate video using Remix Video (Currently using G-Force)

In "emergency operation" computer #2 has all the different software packages and libraries to be used as the main DJ computer.

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 06 Sep 2017, 07:10
by MichPRich
My setup

IMG_20170905_050202_3.jpg

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 30 Mar 2018, 09:37
by ukrsolution
That one is mine babe:
Image

Andrew
Ukrsolution

Re: Photos of Mixvibes users hardware... Post more...

PostPosted: 06 Jul 2018, 01:26
by FigDJ
Little video of a fundraiser gig with the new iOS controlled lights rig.
https://www.youtube.com/watch?v=gLKM0C0kir4&feature=youtu.be
https://youtu.be/g9YGWYqQyEA