Page 1 of 2

Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 07 Oct 2014, 22:31
by JayOGee
XDJ R1(Pioneer).mappings
(49.6 KiB) Downloaded 327 times


Hallo Leute,

hier kommt die Mapping Datei für die
Pioneer XDJ-R1.
Getestet und für gut befunden auf Cross DJ 3.2 .

Ein paar kleine Schönheitsfehler hat sie zwar noch (Vorspulen im Browser mit Doppelschritt, FX witerschalten auch nur pr Doppelschritt, Loopgröße ebenso), aber sie läuft stabil und die LEDs leuchten auch noch :-D

Falls einer von Euch diese Fehlerchen beheben kann, bitte das Mapping hier wieder posten !

Sonderbelegung FX-Tasten:

>Trans< - Ein-/ Ausschalten des Effektes
>Flanger< - Auf-/ Zuklappen der FX-Leiste


Ansonsten viel Spaß damit :-D

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 18 Nov 2014, 15:28
by armink
XDJ R1(Pioneer).mappings
NEU! XDJ-R1 Mapping Pioneer
(50.13 KiB) Downloaded 304 times
Hi zusammen,

die Fehler müssten in meiner Version 1.1 behoben sein. Bitte nachsehen.

Sonderbelegung FX-Tasten:

>Echo< - Slip-Mode (NEU!) ohne Leuchte bisher
>Trans< - Ein-/ Ausschalten des Effektes
>Flanger< - Auf-/ Zuklappen der FX-Leiste

VG

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 18 Nov 2014, 16:32
by jayogee2014
Klasse !!!!

Danke Dir :-)

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 18 Nov 2014, 16:48
by armink
Kriegst du noch die Beleuchtung der Taste ECHO für Slip Mode hin?

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 05 Jan 2015, 10:20
by mangoman
XDJ-R1(Pioneer) v1_2.mappings
(52.86 KiB) Downloaded 249 times
Thanks to both of you for this mapping!

The club I play at every Friday and Saturday has an XDJ-R1, and I don't own VDJ or Traktor. I downloaded armink's mapping on Friday night while playing off a flash drive in the club, loaded it up and it worked! I ran in external mode. I have a sound card going into the inputs of the Pioneer, so that the level LED's work exactly like they do for the USB or CDs.

I made a couple of changes:
- Made the sync button "toggle" so it stays on when I press it. I prefer it like this - if the downbeat is wrong I'll just turn sync off again.
- Made the browse encoder scroll through whichever browser pane is in focus, not just the current playlist
- Made the back button (above the browse encoder) switch which pane is in focus (collections, folder tree or playlist contents). Shift + back expands/collapses folders.

Changes I'd still like to make:
- I'd like to get the "Master" button LEDs to work
- I'd like to have the pitch range toggle between 6% and 18%. If it goes past 18%, the BPM detection is usually wrong. This is just personal preference. Maybe I'll map the range button to one value, and shift+range to the other value.
- I'd like to have buttons to set the auto loop and seek length in tandum, plus a button to turn auto-loop on and off (maybe I missed this somewhere in the original mapping)
- I wish I could scroll between only my favourite effects. This doesn't seem to be possible in Cross.

Thanks again for the mapping! It was perfect for getting me started without having to fiddle around with all the basics. The jogwheels feel great to me :).

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 19 Jan 2015, 21:17
by armink
mangoman wrote:
XDJ-R1(Pioneer) v1_2.mappings
Thanks to both of you for this mapping!

The club I play at every Friday and Saturday has an XDJ-R1, and I don't own VDJ or Traktor. I downloaded armink's mapping on Friday night while playing off a flash drive in the club, loaded it up and it worked! I ran in external mode. I have a sound card going into the inputs of the Pioneer, so that the level LED's work exactly like they do for the USB or CDs.

I made a couple of changes:
- Made the sync button "toggle" so it stays on when I press it. I prefer it like this - if the downbeat is wrong I'll just turn sync off again.
- Made the browse encoder scroll through whichever browser pane is in focus, not just the current playlist
- Made the back button (above the browse encoder) switch which pane is in focus (collections, folder tree or playlist contents). Shift + back expands/collapses folders.

Changes I'd still like to make:
- I'd like to get the "Master" button LEDs to work
- I'd like to have the pitch range toggle between 6% and 18%. If it goes past 18%, the BPM detection is usually wrong. This is just personal preference. Maybe I'll map the range button to one value, and shift+range to the other value.
- I'd like to have buttons to set the auto loop and seek length in tandum, plus a button to turn auto-loop on and off (maybe I missed this somewhere in the original mapping)
- I wish I could scroll between only my favourite effects. This doesn't seem to be possible in Cross.

Thanks again for the mapping! It was perfect for getting me started without having to fiddle around with all the basics. The jogwheels feel great to me :).



Thank you for using our XDJ-R1 Mapping! Iam testing your changes and ill give you response.

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 01 Feb 2015, 00:46
by mangoman
I've made a lot of changes since that mapping, to suit the way I play. I'd like to upload it, but first I'd like to make a diagram to explain everything properly.

13 downloads. That tells me a few people use the XDJ-R1 with Cross. It would be so cool if they'd make a HID mapping for us!

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 30 Mar 2015, 06:51
by DjMP
Hello, thanks for your mapping setting, but i have got a problem : sounds goes directly on master channel not in channel 1 and 2. Can you help me plz ? And also can you put on the led of the 2 jog. Thx

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 30 Mar 2015, 08:50
by RoJeC
You'll have to provide some more details.

Usually channel 1/2 is the master channel...

If you mean your Cue sound goes to master, you have to turn the knobfader Mix to the left. (right top of screen)

BTW MIDI and sound routing have no technical relation at all.

Re: Endlich ein Mapping für Pioneer XDJ-R1

PostPosted: 30 Mar 2015, 11:10
by DjMP
RoJeC wrote:You'll have to provide some more details.

Usually channel 1/2 is the master channel...

If you mean your Cue sound goes to master, you have to turn the knobfader Mix to the left. (right top of screen)

BTW MIDI and sound routing have no technical relation at all.


Thanks for your reply : for more détails
Have a look at the mixer :
http://www.djstuff.fr/wp-content/upload ... -table.jpg

Only leds of the master is working, i can modify each channel (TRIM, HIGH, MID.. ) but leds don't work !

Otherwise, if i send you MIDI informations of the XDJ R1, can you help me to put the leds on of each jog Wheel (when sound on) ?

I will check this afternoon (to turn the knobfader Mix to the left. (right top of screen))