MIXVIBES Dj Community old forum

Bonjour à tous,

Suite au formatage et à la réinstallation complète de mon PC sous Windows 7 64 bits, je rencontre le problème suivant avec Cross DJ 3.3.5 (64 bits) et le contrôleur U-Mix Control Pro :
Quand je sélectionne dans les paramètres Audio "Mixvibes ASIO U-Mix Control Pro", j'ai le message suivant :

Suite à la lecture de ce post :
http://forum.mixvibes.com/viewtopic.php?f=270&t=21700
Je suis allé dans les paramètres audio de mon PC via le panneau de configuration :
En effet ma carte son Réaltek n'était pas la carte par défaut.
J'ai appliqué,

même problème.
J'ai désinstallé U-Mix Control Pro 1.05 et réinstallé, idem.
Je tourne en rond et ça me prends bien la tête.
Toute aide sera la bienvenue.
Cordialement

Sorry for my French. .

You'll have to use the asio4all driver for the soundcard.
Can be downloaded from asio4all . Com. Website.
In audio tab of preferences you have to use settings option to set the driver to use U-Mix Control Pro.

thank you very much
I'm testing on

After a test I don't have the error message anymore and I have the sound on the amplifier.
But I can not have the preview in the headphones and I can't find the settings
Thanks for your help

In preferences audio use "dual stereo".
In mixer section click on head phone (listen to deck).
or at right of track rack to listen to selected track.

For deck: knob faders at right top.
Cue= headphone volume
mix= headphone volume + master volume mixed to headphone (left = headphone, right =master)

Somewhat depending on your further wiring a different mode may be needed.

I have found but my problem is not resolved
With this driver, the MIX fader in the front of the controller to select MASTER or CUE is not working properly.
Completely on CUE, I still have the MASTER or not,
I have to turn the fader several times
... Mystery

The problem is Cross-Dj 3.3.5 software.
I reinstalled an older version (3.1.0) and everything works fine.
To go back to the developers.
Another problem with the latest versions of Cross-Dj, when one is in the list of tracks for the column Track Number, sorting is no longer (to put the tracks in numerical order)

Another big thank you for your help

MIDI and audio are different things. Asio4all is only doing audio.

Going back should not be the solution. . But understand you do.

I must say that last weekend i had a problem with the mix fader of my controller. It only worked when turning it slow. Still have to check. Your issue motivates to dig in some more

I also had a problem with the fader.
Since a long time, it only worked on the left.It was blocking in the middle when I put it to the right.
I even considered order one to replace it.
And there, it works ...
I know that MIDI and audio are different things
But it's pretty weird ...

Blocking at one position, especially left middle or right, indicate a mapping problem.