warning the percentage of time code (0%) is too low?

[lazyellowing]

for a while now i've not been able to configure my timecode vinyls..well it tells me i've got a good signal or whatever but it says mixvibes has failed to detect timecode.but works fine.and i've been doing gigs like that and theres nothing wrong and works fine lol.

but i just updated to 6.33

and it keeps saying warning percentage of time code (0%) and wont work...help ?

heres my config report:

Config 2007/01/12 03:59

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 14 Stepping 8, GenuineIntel
MixVibes DVS version=6.330 DLL langage=US version=6.290

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes Channel3= Yes
Load memory time limit=13 Load time=normal
Priority program=real Low gui priority=Yes Equalization bypass=Yes
Microsoft codec=No MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=3 Nb Samples=0
Windows Caption=No Style=XP2005
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Lock Out=Yes Volume=Yes Equalization=Yes Loop=No Effects=No
Loop in bar boundaries=No Security=Yes History=No
Compressor=No Limiter=No
Noise=No Vol=0 Crakle=No Vol=0 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46DJ AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-USB Audio Device 1 2-USB Audio Device 2
3-USB Audio Device 3 4-USB Audio Device 4

Vinyl Configuration
--------------------
Style mix=scratch

Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:USB Audio Device 1-USB Audio Device 2
Mode=All relative
Riaa=No Preamp Left=54 db Preamp Right=55 db Noise Filter=1 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=27262 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=0 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.257 Volume max right=0.354 Volume optimum=0.370
Speed Average(100ms)=0.110 Speed Average(1s)=0.110 Speed Average(3s)=0.110
Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:USB Audio Device 3-USB Audio Device 4
Mode=All relative
Riaa=No Preamp Left=3 db Preamp Right=2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=0 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

im running a u46dj thing off two Numark tt500s with ortofon scratch needles....if that halps at all :S

[dj9]

Hi ,

After an update execute the file reset.exe and run your mixvibes and reconfigure all.

It can help you.

Bye.

[lazyellowing]

tried reset thing nothing happened...now DVS won't load up cus it says cant find skins..changed the registry thing tooo :S going to try reinstall...

[Willacox]

while playing the vinyl, try to click "reverse L/R", then "apply", it would help

[cyberface]

Yes, this is the only solution that I found too or to invert the white cable by the red cable on my soundcard.

[lazyellowing]

wooo sorted it thanks everyone