MIXVIBES Dj Community old forum

Hello everyone
i got U-Mix controler and soundcard u-mix44 i bought them recently but i can make them to work.
The players and the driver works fine the only problem is that
i cant make the headphones to mix.
In my headphones i hear the same as the speakers and i want to listen every deck seperated so i can mix.

This is my configuration
Config 2011/06/27 15:52

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel
MixVibes 3DEX version=7.310 DLL langage=US version=7.300

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=Yes History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

I use mixvibes .
Can someone help me cause i want to MIX like hell

Hey,

forum rules. please register your software. To insert registry ucp.php?i=169

regards
Christian

ok done. what's next ?

ok.

Have you enabled Asio Audio for the U-mix44? Set Number of device to 2 and press setup and set one of the channels to Headphone. At the right columne there is a radio button where you can select one of the channels as Monitor. Choose the output pair Channel3/4 to Monitor.


Then you can enable the headphone (Monitor) button and you should hear a seperate sound.

regards
Christian

preferences > option > soundcard > mixvibesAsioumix44 number of output 1.
On Setup Audio output left not connected
right 2 not connected


When i use multichannel in soundcard preferences
output device speakers (2mixvibes U-Mix44 soundcard)
monitor 4 front center
number of output 4(7.1)
latecny 100(ms)

With this setup everything works fine except the headphones.

So i have to setup Asio ? in Audio interface recognize it that means that my drivers are working?
When i use the asio drivers everything is working except that i dont have any sound.

Hello, in order to help you out, can you please do screanshots of your audio setup.

have you installed for the U-Mix44 the Asio Driver from the Forum? the newest? at the Downloadsection.

Then you go under Preferences -> option -> Soundcard -> Asio enable it set device number to 2 and press setup.

christiankoopmann wrote: in Audio interface recognize it that means that my drivers are working?

Which audio interface? From Windows or that from MixVibes?

Which OS do you use currently for that? Win 7 x64 or something diferent? And please install the newest driver for the U-Mix44. First delete the old one and unplug the device then ccleaner or something equal (please save the old registry first!) and then install the new driver. Plug the Device on. And then test it again if it is now working.

regards
Christian

http://imageshack.us/photo/my-images/9/ ... etup1.png/

http://imageshack.us/photo/my-images/18 ... etup2.png/

I got the newest driver

in setup with multi audio everything works except the headphones its not separate from DeckA and DeckB .

So It doesnt recognize in the setup the USB devices.

from my woofer i had 3 cables who lead to my soundcard in the PC
and now the "audio" cable from woofer the green one i put in i jack who split it into two the red and black which is in output 1.
Headphones on the U-Mix44 .

It looks like for me that you Asio driver for the U-Mix44 is not installed correctly.
Normaly there should stand something different and not Not Connected.