Problems again II [Solved]

[Sebas94]

Hi again, my new problem is that i have instaled windows 7 on my PC and when i open mixvibes if seems like i have no vinil and no cdj connected, and whe i pay my cdj is sounds a disturbing piiiiii sound,
some idea?
Thanks

[christiankoopmann]

Hey,

check if maybe the Baypass is enabled?

regards
Christian

[Sebas94]

No, is not activated, the cdj doesnt star the song, only does that piiiis sound, and the vinil works like it were on bypass mode (but it isnt) but without touching anithing, i put the song on the loader of the software, and starts, with no sound of course

[christiankoopmann]

OK
could you please post a config report when everything is running?

regards
Christian

[Sebas94]

Config 2011/05/18 21:01

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 7, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1- 2-

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:Not Connected 1-Not Connected 2
Mode=absolute
Riaa=No Preamp Left=12 db Preamp Right=25 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=0:Not Connected 1-Not Connected 2
Mode=absolute
Riaa=No Preamp Left=36 db Preamp Right=35 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected


there is it

[Blackbrook]

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1- 2-

There is problem with your audio interace driver. It is not recognized correctly! Please do a complete reinstall (check the tips & tutorials section for a how to).

Cheers,

Steve

[christiankoopmann]

Hmmm it's look like the soundcard is not installed correctly.
At soundoutput there is only shown 1 - 2 - and the turntables/CDs are not connected.

I would test to install the driver for your asio soundcard new. From the last posts from the other thread I mean you have an U-Mix44 or?
Have you installed the newest driver here from the board?

regards
Christian

[Sebas94]

I have installed the drivers, i have reinstalled the program and i still the same

Config 2011/05/18 21:23

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 7, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:Not Connected 1-Not Connected 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=1066597532160415300000000000000000.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=0:Not Connected 1-Not Connected 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[Hannes]

But did you deinstall the old driver properly as stated in the link that Blackbrook sent you?

regards
J

[Sebas94]

I havent found the link, i have go to control panel, uninstall programs, and i have uninstall me program and drivers, the i have installed the again