Page 1 of 1
Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
24 Jan 2011, 23:51
by DJ Diego
Ok, I am using Cross on two Laps, Vista and Win 7. Use it with Vetsax VCI 100 and U 46MK2 or CDJ 400.
Sometimes, when I start Cross connected with the U46, the tracks are running with a multiple speed. Can't do anything but restart the computer. After some restarts, the system runs like it has to. I am working with Cross every weekend and beside this problem, it runs perdect.
Any idea? Any further info needed?
Re: Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
25 Jan 2011, 12:54
by Support@MixVibes
What drivers do you have with the U46 ?
When this happen, how is the timecode quality ?
It also can happen if vinyl is selected and you're using cd.
Re: Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
25 Jan 2011, 20:29
by DJ Diego
MixVibes U46MK2 Asio
I do not use timecode
I am using the Vinyl Modus but with my Vestax 100. No Time code Vinyls.
Thanx
Dirk
Re: Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
26 Jan 2011, 12:14
by Support@MixVibes
So your using MIDI from the cdj 400 and the vci100 , right ?
Which one is driving the scratch/position, cdj or vci ?
Try with cdj only or vci only to see if it does it with both or with only one.
Re: Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
26 Jan 2011, 19:31
by DJ Diego
no, no,
I use different set ups.
1. Cross with Vestax VCI 100 and U46
2. Cross with CDJ 400
but never both together.
I suppose, the problem is with the MV U46 Driver. But, as I use the CDJ not very often, I am not sure.
Thanx Dirk
Re: Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
01 Feb 2011, 23:37
by DJ Tino
Hello DJ Diego,
my english is abd but i hope you can understand me.
I had the same problem and i installed the newest u46 driver. After that all works fine !!!
all the best ,
tino
Re: Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
02 Feb 2011, 10:37
by christiankoopmann
Hey,
this problem sounds like the problem I had a few month ago. When I use my U46 on my laptop and at home on my Computer the first time it was playing with an funny speed.
The Problem was: On my laptop I use the U46 with 44100. On my Computer with 48kHz.
Check this if you have the same difference. At my system it was the problem to set both systems to the same Latenz and so on.
regards,
Christian
Re: Cross 1.5.0, U46MK2 tracks are running with multiple speed

Posted:
10 Mar 2011, 20:56
by DJ Diego
Solved the problem downloading a new driver for my U46. Instead of the MV, I took the Esi. But I suppose the old driver was damaged. Think it works with Esi and MV either.
Thanx to everybody
Dirk