MIXVIBES Dj Community old forum

Hi guys,

i recently updated from mixvibes 7.3 to 7.4. The problem is that even though i activated intelligent loops it doesnt work at all. In 7.3 when i did press the F1 button the loop started when i pressed F2 it endet exactly 4 or 8 or what ever beats later. When i did press F1 again the loop stopped and the song went on. Now i press F1 and the loop starts F2 stops it and F3 returns the song. Also the marked beats are white now which is different from the loop i was used to from 7.3 aswell.
The problem is that the beats now are not automatically completet to 8 beats. They are sometimes off slightly and as result the beat doesn't match anymore.
I attach my config report and hope you can help me.

Best regards



Config 2010/10/27 15:26

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes Producer version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=14 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=50 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34081536
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-OUT 0 - Maya44 2-OUT 1 - Maya44
3-OUT 2 - Maya44 4-OUT 3 - Maya44

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:IN 0 - Maya44-IN 1 - Maya44
Mode=all relative
Riaa=Yes Preamp Left=27 db Preamp Right=27 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:IN 2 - Maya44-IN 3 - Maya44
Mode=all relative
Riaa=Yes Preamp Left=27 db Preamp Right=27 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

Here is the behavior of 7.4 :
F1 : manual loop in
F2 : manual loop out
F3 : manual loop exit/reloop
F4 : autoloop on/off

Thank you for your reply!


I got a acai lpd 8 pad which i use for loops. I now understand how automatic loop behaves but it doesnt work with my pad. If i click send 16 beats or 8 beats mixvibes loops the beats as it should. If i click again it returns playing the song. If i bind the send key on my pad it also starts a loop but if i touch the button again it doesnt return into playback... I dont want to switch back to 7.3 because i really like the new bpm and the fact that you cant have songs twice in playlists.

Thanks in advance

Please post the code of the pad to see what's wrong with it.