Page 1 of 1

problem with U-Mix 44

PostPosted: 09 Sep 2010, 07:17
by Lionele11
so i have a U-Mix44 connected to my two stanton T.80's and a stanton smx 401 mixer. the problem is that mixvibes is only reading one of the turntables. the U-Mix 44 reads both because when they are one the U-Mix 44 shows that its receiving the input so basically im stuck nd dont know what to do.http://i172.photobucket.com/albums/w16/ ... s.png...oh i tried like 10 times to register my product but it says my serial code is invalid which isnt true because i just used it to set up my mixvibes copy.
Config Report:
Config 2010/09/08 22:16

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS LE version=7.300 DLL langage=US version=7.300

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=No
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=24 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=21843 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.736 Volume max right=0.736 Volume optimum=0.370
Speed Average(100ms)=0.996 Speed Average(1s)=0.996 Speed Average(3s)=0.995


Vinyl 2 not connected

Re: problem with U-Mix 44

PostPosted: 09 Sep 2010, 07:23
by Lionele11
Image

Re: problem with U-Mix 44

PostPosted: 09 Sep 2010, 09:00
by marryanne
I only joined this site to help u out! i jus finished hooking up my U-Mix 44 and i was having the same problem!
ever since i updated myself to Cross from the phono and the U-Mix 44 Mixvibes Cross 1.3.2 MacBook Pro.

make money online

Re: problem with U-Mix 44

PostPosted: 09 Sep 2010, 11:16
by UncleVibes
hello,
welcome on this forum please add your serial to your profile to be identified as a Cross user & to access to updates. Cross current version is 1.4.
Thanks we will help you when it's done.

Re: problem with U-Mix 44

PostPosted: 10 Sep 2010, 19:01
by Lionele11
ok i got my product registerd now

Re: problem with U-Mix 44

PostPosted: 13 Sep 2010, 12:16
by Support@MixVibes
DVS7 LE only support one input, you need to upgrade to a full version.

Re: problem with U-Mix 44

PostPosted: 15 Sep 2010, 01:56
by Lionele11
ha...yea i figured that out...thx