MIXVIBES Dj Community old forum

Hi there,

This is my config report:
Config 2010/01/19 22:57

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 6, GenuineIntel
MixVibes DVS version=6.412 DLL langage=US version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Kernel
Device=SigmaTel Audio Latency=24
Device=USB Audio CODEC Latency=24

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=USB Audio CODEC source=default
Mode=Absolute
Riaa=No Preamp Left=2 db Preamp Right=2 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=Windigo BT Audio source=MIDI
Mode=Absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms


(1) In the File/Options/Vinyl, I'm unable to select MULTICHANNEL as the "Audio" and hence I cannot select USB AUDIO CODEC for the "Source"

(2) I was able to select USB AUDIO CODEC for the "Audio" but all I'm getting is a high pitch sound from the mixer output to the speakers.

I sure do appreciate any help I can get, thanks.

Hi anilde,

From what I can tell, it looks like you're using version 6 and haven't installed the proper drivers. Head over to the download center and grab the latest update. Are you trying to use an internal or external soundcard?

Hey Phadedvision,

The latest update for the DVS LE that I saw was version 6.412 (I could be wrong on this), this version is already installed on my PC.

Which drivers do I need to install?

I'm presently using an internal soundcard, what is the minimum soundcard compatibility to use the mixvibes program?

I was looking to purchase an external soundcard "PPA 1455 USB 6 channel external sound adaptor". Will this work/ solve the problem.

Thanks

anilde2010 wrote:I'm presently using an internal soundcard, what is the minimum soundcard compatibility to use the mixvibes program?

Hi Anilde2010

Do you want to use Vinyls for controlling? Do you have a external mixer

marxon

Marxon,

I'm using the DJ TECH iSCRATCH 101 CD player connected to an external mixer (Behringer VMX1000).

I am using the Time Coded CD for controlling.

anilde2010 wrote:Marxon,

I'm using the DJ TECH iSCRATCH 101 CD player connected to an external mixer (Behringer VMX1000).

I am using the Time Coded CD for controlling.

Hi again...
I searched about this players: they have built in soundcard.
So you dont need a other one

Thanks Marxon,

Atleast I don't need to buy another piece of equipmnt.

But now I'm back to square 1 in trying to solve this problem.

According to the mixvibes DVS LE manual that I got with the CD players:
(1) In the File/Options/Vinyl, I should be able to select MULTICHANNEL as the "Audio" and USB AUDIO CODEC for the "Source"
However I'm not getting the option to select MULTICHANNEL as the "Audio".

Hi again!

Is your version 6.4.. the latest update?

Update your DVS LE to the latest edition first, before going further. There is a Version 7 of the LE, available from the download center if you've registered your product on the forums, which I see you have.

You do not need to use the timecode CD on those CD decks. I believe they have an HID function which means the player can directly control the software. Connect your decks via USB first.

Update your DVS LE to the latest edition first, before going further. There is a Version 7 of the LE, available from the download center if you've registered your product on the forums, which I see you have.

Stealthii,

When I went to the download center, and selected the UPDATES section, the site is only taking me to the DVS LE 6.412 version which was last updated since 14th August 2008.
If there is a version 7, somehow the site is not allowing me to access it.

Can anyone help in trying to get access to this update?

Thanks