MIXVIBES Dj Community old forum

i dont know how to explain this very well so i will try as best as i can.
when im scratching a sound the first 1/3 second (approx) repeat twice after i release the vinyl.
so if i bring the vinyl back and release it, the first 1/3 second of the sound on which i released the vinyl repeat.
thanks in advance

Config 2009/12/04 12:44

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=No AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=125 max=175
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Channel
Device=SigmaTel Audio Latency=120

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=U46MK2 Ch123456 source=
Mode=all relative
Riaa=Yes Preamp Left=4 db Preamp Right=5 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=94.915 Volume max left=0.645 Volume max right=0.645 Volume optimum=0.370
Speed Average(100ms)=0.985 Speed Average(1s)=0.985 Speed Average(3s)=0.986


Vinyl2 connected=vinyl version 2
Audio=SigmaTel Audio source=
Mode=absolute
Riaa=Yes Preamp Left=6 db Preamp Right=5 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

hi markoac
does it allways happens after spinning the vinyl backwards and release it again or only after repeating some scratches?
are you using the relative or absolute vinyl mode?

marxon

EDIT:
your Config Report shows you have selcted "Managment Type Multi Channe" in your sound configuration. Change this to "ASIO" and select your U46MK2, choose number of outputs, now select the output ports of your U46MK2 with the "config" button
In Vinyl options:
-set Audio interface to ASIO
-choose inputs where your turntables are connected.