MV Producer HELP!!!

[Rowg]

Hi Guys,

I have just upgraded from DVS 6 to PRO 7

I am using 2 x 1210's, maya 44USB, and Behringer djm750..

Everything sets up fine in pro, much easier i found that with 6... except!! the waveform on the player has a mind of its own. The sound doesnt jitter, but the waveform does. This is mostly when the timecode vinyl is stopped, or being moved slowly.

I had a previous issue with 6, which i sorted out with ground loop isolators... and am still using these. there are no audio interferences/pops/crackles or anything..just visual problems on the waveform (which is a nuisance with cueing/sampling etc!

Hope someone knows what to do!!

Thanks,

R

[Rowg]

Config Report:

Config 2009/12/04 15:16

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes Producer version=7.043 DLL langage=US version=7.040

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34083072
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-OUT 0 - Maya44 2-OUT 1 - Maya44
3-OUT 2 - Maya44 4-OUT 3 - Maya44

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:IN 0 - MAYA44 USB-IN 1 - MAYA44 USB
Mode=all relative
Riaa=No Preamp Left=22 db Preamp Right=21 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:IN 2 - MAYA44 USB-IN 3 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=23 db Preamp Right=21 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[phadedvision]

Hi Rowg,

Double-check that your ground wires are attached well.

Cheers!

[Rowg]

Hi,

I have done this and its still the same. I have tried doubling up ground loop isolators on the inputs and outputs of the soundcard, I have tried removing the ground loop isolators all together, and still the same.

Now I have had a go, and there is a way of fixing it... when i cycle through the vinyl control options and get back to all relative (which i use), it works fine.. is this a problem with my timecode maybe?

[hemskoc]

Welcome Rowg..
You probably wont get more help unless you do the following:

"Forum rules
-Please register your software (User Control Pannel > Profile > Serial Number)
- Go to the download center and install the latest versions of software and drivers
downloads.php"

I did not make the rules, i just follow them
regards