MIXVIBES Dj Community old forum

Posted: **26 Nov 2009, 23:11**

I posted the same problem back in august and after updating the software and trying again few days ago i still cannot restart the track from the begining.

This is what it is. When i use the DVS 7 with turntables it works perfectly, but when i use cdjs as controlers with the original controler cds i cannot return or cue the track from the begining after listening to it and preparing for the mix, it always continues from the same position where it was, the moment i hit the back button on the cdj, it doesnt go to the start of the track. I tried everything and still cannot do it.
The CDJs at the club were Pioneer CDJ 1000 MKII and MK3

Can anyone help me solve this problem cause till now since i bought it i had to prepare my sets on cds few times now for clubs where they dont have turntables and when i was deciding to buy this whole package i never planned to prepare my sets on cds along with my set in the laptop, and have so much trouble and stress for nothing.

I am using the HD cds.

I have attached the config report i made when i had my laptop connected to the club setup with the cdjs and the mixer.

thank you in advance

Config Report:

Posted: **26 Nov 2009, 23:55**

I remember i had this problem a while ago but cant remember if i fixed it or not
nothing looks incorrect with your config
ill borrow some CDj's on the way home and see if i can replicate it again ill let you know

Posted: **27 Nov 2009, 12:33**

Absolute, relative, all relative mode ?

Posted: **27 Nov 2009, 20:36**

I have tried all three modes, no change

Posted: **27 Nov 2009, 20:38**

Abitmessie thx for the reply hope you find the problem

Posted: **30 Nov 2009, 11:05**

Can you check the inputs while your doing this ?
Post a config report too.

Posted: **02 Dec 2009, 18:08**

I have posted the config report in my first message, at that time i had the whole setup in place, with the mixer and the cdjs, the inputs were ok i was able to control the track to scratch it but the moment i hit the back button to start the track from the begining it continued from the place where it stopped

Posted: **02 Dec 2009, 20:04**

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - MAYA44 USB-IN 1 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=-3 db Preamp Right=-3 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=282331771479726080000000000.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Vinyl2 connected=CD
Audio=ASIO source=2:IN 2 - MAYA44 USB-IN 3 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=-3 db Preamp Right=-3 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=282331771479726080000000000.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

I'm sorry but I don't have the info I need to help you. The config report must be done with decks playing at 0 pitch with no master tempo.

Posted: **02 Dec 2009, 23:02**

Sorry guys been a bit of a crazy week,, had my birthday and the family decided it was a great idea to by me all new furniture for my studio
Which dont get me wrong was a great gift but has caused the last week to be filled with packing everything down and cleaning out old stuff and setting everything back up again (so many cables :eek:

)
but tonight/tomorrow i shall be complete and will get to testing this problem

Posted: **04 Dec 2009, 01:57**

Hello again,

right now i dont have decks at home, so i will try to get couple tomorrow or maybe on saturday so that i can do what you asked for

thanx again

MIXVIBES Dj Community old forum

Never can restart a track with CDJ when using DVS 7.218

Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218

Re: Never can restart a track with CDJ when using DVS 7.218