MIXVIBES Dj Community old forum

Hellow, i'm looking for a new laptop to use with my Mixvibes DVS.
Now the newest computers have Windows 7 running on it, but is that compatibele with Mixvibes DVS and the U46 mkII soundcard?
If so, are mixvibes and its soundcard also compatible with the 64 bit version of Windows 7?

Hi Hollender, welcome to the forums!

To answer both of your questions: yes! MixVibes will work on Windows 7, and it will work on the 64-bit platform. On 64, you'll need to use the ASIO4ALL driver instead.

Hope this helps,
Phaded

Thx for the quick reply, and yes, it was very helpfull.

Well, i finally have my laptop!
But somehow i have a problem with my asio driver.
Every time i start the installation wizard, it says "U46 asio driver not present".
I use the latest version of mixvibes 7.218 with the newest asio4all driver, and it's running on a Sony Vaio laptop, Windows 7 Home Premium 64 bit.
I get everything running, but with clicks in the sound. I guess it's running without the proper driver.
Can anyone help?

This is my config report:

Config 2010/07/12 14:06

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-U46DJ 1 2-U46DJ 2
3-U46DJ 3 4-U46DJ 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U46DJ 1-U46DJ 2
Mode=absolute
Riaa=Yes Preamp Left=3 db Preamp Right=2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.575 Volume max right=0.575 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U46DJ 3-U46DJ 4
Mode=absolute
Riaa=Yes Preamp Left=6 db Preamp Right=6 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.621 Volume max right=0.621 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

MV 3.0 should do the trick

I'm sorry, but what is MV 3.0 ?

Okay, i allready had that driver installed, but without result.
I tried the esi driver, also without succes.
Now i uninstalled eveything, fresh mixvibes installation, esi driver, no result. uninstalled the esi driver, installed the mixvibes 3.0, still no result.
Also un- and re-installed the asio4all.
I don't get the "driver not present" message anymore.
The problem now is that mixvibes doesn't get a signal from the turntables. And i'm sure they're okay, checked the signal on my mixer.

Here is my new report:

Config 2010/07/13 11:54

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=Yes Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-MIXVIBES U46 1/2:L 2-MIXVIBES U46 1/2:R
3-MIXVIBES U46 3/4:L 4-MIXVIBES U46 3/4:R

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MIXVIBES U46 1/2:L-MIXVIBES U46 1/2:R
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:MIXVIBES U46 3/4:L-MIXVIBES U46 3/4:R
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Nope, can't get stuff working here.
I just reinstalled Mixvibes DVS, did all the upgrades, installed the asio4all driver, and the u46mkII v3.0.
No changes.
I can't get a signal from my TT's.
I can play sounds over my u46 though.

I'm a bit lost : why do you had all these drivers on the system ? (ESI / MV / ASIO4ALL).
The only thing it can do for you is corrupting the registry base.

Can you please send a screen shoot of the U46 panel ?
Soundcard tab in MV / Keep U46 settings : enable or not ?