Page 1 of 1

[solved]dvs7 no sound searching in a track with the vinyl

PostPosted: 12 Sep 2009, 17:11
by AceTech
Hi,

When I try to find a point uitable for slip cueing, i experience the following problem: If I place my needle on the record (not in the beginning of the vinyl) and I want to rewind it manually by spinning it counterclockwise with my hand, i get no sound during the actual action , which makes it very hard to find a good cueing point. I know you can do it digitally, but I'm used to mixing with vinyl only so is there any solutuion to this problem?

Thank you!

Re: dvs7: no sound when searching in a track with the vinyl

PostPosted: 14 Sep 2009, 13:51
by polocorp
hi, what mode are you spinning in ? absolute ?

how do you experience the problem ? do you momentarily loose sound during the spin back ? If so this si because you are back spinning to fast for the software to decode your timecode... try spinning a little slower. This problem accures with all DVS systems if you make a drastic spin.

Re: dvs7: no sound when searching in a track with the vinyl

PostPosted: 14 Sep 2009, 17:20
by UncleVibes
If so this si because you are back spinning to fast for the software to decode your timecode... try spinning a little slower. This problem accures with all DVS systems if you make a drastic spin.


No, there is something wrong with your setup. Can you post a config report extracted from mixvibes with your turntable at 0 pitch.
Also send details about your computer.
You shouldn't have this problem while spinning with DVS.
Fast spin is common to all scratchers.

Re: dvs7: no sound when searching in a track with the vinyl

PostPosted: 14 Sep 2009, 19:25
by AceTech
UncleVibes wrote:
If so this si because you are back spinning to fast for the software to decode your timecode... try spinning a little slower. This problem accures with all DVS systems if you make a drastic spin.


No, there is something wrong with your setup. Can you post a config report extracted from mixvibes with your turntable at 0 pitch.
Also send details about your computer.
You shouldn't have this problem while spinning with DVS.
Fast spin is common to all scratchers.


will do that as soon as possible :) thanks in advance

Re: dvs7: no sound when searching in a track with the vinyl

PostPosted: 16 Sep 2009, 11:48
by AceTech
Config 2009/09/16 11:32

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=0 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=No
Display Pitch=Yes Auto Match at load=No
Bpm Range min=120 max=250
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=47 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-U46DJ 1 2-U46DJ 2
3-U46DJ 3 4-U46DJ 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U46DJ 1-U46DJ 2
Mode=absolute
Riaa=No Preamp Left=5 db Preamp Right=6 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.556 Volume max right=0.556 Volume optimum=0.370
Speed Average(100ms)=1.003 Speed Average(1s)=1.001 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U46DJ 3-U46DJ 4
Mode=absolute
Riaa=Yes Preamp Left=2 db Preamp Right=2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.594 Volume max left=0.514 Volume max right=0.514 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000

Re: dvs7: no sound when searching in a track with the vinyl

PostPosted: 16 Sep 2009, 12:09
by N-deep
AceTech wrote:Latency=47


This latency is way too big! Can you try to change it to 12?

Re: dvs7: no sound when searching in a track with the vinyl

PostPosted: 16 Sep 2009, 12:10
by UncleVibes
or between 3 to 6 ms (128 / 256 samples) see the audio panel of your sound card.

Re: dvs7: no sound when searching in a track with the vinyl

PostPosted: 21 Sep 2009, 23:44
by AceTech
it's solved... apparently "the load in memory" time was set to 0 minutes :rolleyes: must have missclicked something there