MIXVIBES Dj Community old forum

I've had alot of trouble with mixvibes recently using it on another computer. Before I left on holidays two weeks ago, half the times i ran the install wizard, it said there was a problem with the asio driver. There was also a problem with the second channel, as in the sound being extremely loud and distorted for every track I tried to play.
Ive just got back from holidays, and have run mixvibes. This time things seem to be working better. The problem I have now is that when i take the needle off either track, there is a 'wobbeling'/ hissing sound. When the Cross faders are down for either channel you can't hear it. When you change track, it stops until i take the needle off either channel again. Another strange thing is that for some reason, channel two "right turntable" has to be on 45 rpm. For the last year I've used mixvibes its always been 33 rpm.

Any advice on how to fix these problems would be greatly appreciated,
Justin

Config 2009/08/27 14:09

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=42 db Preamp Right=41 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=96.548 Volume max left=2.164 Volume max right=2.164 Volume optimum=0.370
Speed Average(100ms)=0.071 Speed Average(1s)=0.072 Speed Average(3s)=0.072


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=42 db Preamp Right=41 db Noise Filter=0 Hz
45T=Yes InverseLR=No PhaseInv=No
Decalage=1 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=97.464 Volume max left=5.138 Volume max right=5.138 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Hi,

Your config report seems ok to me. It may be a driver issue. What driver version did you install?

v1.041

Thanks. Can you try the asio4all driver? Check www.asio4all.com.