Cant restart the track with cdj1000 Pioneer

   Forum closed (read only)
Forum rules
PLEASE.READ.FORUM.RULES.SUPPORT.UPDATE


FORUM CLOSED PLEASE POST in NEW TECHNICAL FORUMS BY SOFTWARE FAMILY

* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.

Re: Cant restart the track with cdj1000 Pioneer

Postby DJ GAZ P on 23 Feb 2012, 21:55

HI iv just taken it of my laptop and am installing again :confused: as cd was cueing and loop where working but sound quality was poor and it was playing both tracks out of one channel even tho its setup on two ?
DJ GAZ P
 
Posts: 9
Joined: 20 Feb 2012, 14:59


Re: Cant restart the track with cdj1000 Pioneer

Postby christiankoopmann on 23 Feb 2012, 21:58

Okay, I thought you want one channel because you set it to one. You can see it on your Audio section at the Config report.
DJ GAZ P wrote:Nb Sound=1 Nb Mixer=0Managment Type ASIODevice=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4Managment Type ASIO 1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2


Check if the driver of the U-Mix44 is the newest. At the forum download page is the newest also for x64 and so on!

regards
Christian
Image
Image
February 2012 Mixvibes DJ of the Month
DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
christiankoopmann
 
Posts: 1823
Joined: 19 Dec 2008, 15:44
Location: Paderborn, Germany


Re: Cant restart the track with cdj1000 Pioneer

Postby DJ GAZ P on 23 Feb 2012, 22:00

that seems to work better now
Config 2012/02/23 20:58

OS=Microsoft VISTA Service Pack 2 build=6002 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.710 Volume max right=0.684 Volume optimum=0.370
Speed Average(100ms)=1.065 Speed Average(1s)=1.064 Speed Average(3s)=1.064


Vinyl2 connected=CD
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.711 Volume max right=0.714 Volume optimum=0.370
Speed Average(100ms)=1.019 Speed Average(1s)=1.019 Speed Average(3s)=1.019


Vinyl 3 not connected
Vinyl 4 not connected
where do i get the updates
DJ GAZ P
 
Posts: 9
Joined: 20 Feb 2012, 14:59


Re: Cant restart the track with cdj1000 Pioneer

Postby christiankoopmann on 23 Feb 2012, 22:05

Now you should have two outputs set.
and you have also the newest 7.4 version installed so you don't need any updates.

The timecode looks also well with 100% of quality.
Check if it is now better or not.

If you have still the problem with both decks comes out of one channel check the output configuration. You can check this best with the Carbon V2 Skin then you have on every deck a number. There should stand on deck 1 a "01" and on deck 2 than "02" then you should have sound on both channels.

Regards
Christian
Image
Image
February 2012 Mixvibes DJ of the Month
DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
christiankoopmann
 
Posts: 1823
Joined: 19 Dec 2008, 15:44
Location: Paderborn, Germany


Re: Cant restart the track with cdj1000 Pioneer

Postby DJ GAZ P on 23 Feb 2012, 22:15

hi christian

thanks for the help but it seems to be working now :D how do you get new skins iv seen then with the cdj1000 and the djm but not got a clue how to get them or where?

many thanks gareth
DJ GAZ P
 
Posts: 9
Joined: 20 Feb 2012, 14:59


Re: Cant restart the track with cdj1000 Pioneer

Postby christiankoopmann on 23 Feb 2012, 22:19

Hey,

you can look here at the download section of the forum for skins but I use the traditional skin. I need it clear and without much pictures.

And have fun with your product.

Regards
Christian
Image
Image
February 2012 Mixvibes DJ of the Month
DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
christiankoopmann
 
Posts: 1823
Joined: 19 Dec 2008, 15:44
Location: Paderborn, Germany


Re: Cant restart the track with cdj1000 Pioneer

Postby DJ GAZ P on 23 Feb 2012, 22:28

will have a good old play now many thanks m8 might even do my show on saturday if i get to grips with it by then :biggrin:
DJ GAZ P
 
Posts: 9
Joined: 20 Feb 2012, 14:59


Re: Cant restart the track with cdj1000 Pioneer

Postby daniel clark on 23 Feb 2012, 22:58

:cool: :cool: glad to hear and also when you master the software please post some mixes in the fourm to enjoy :cool: welcome again :!:
Image
Image
January 2012 Mixvibes DJ of the month
MEMBER OF:
:cool: C00l People MV Society :cool:

PLEASE REGISTER YOUR SOFTWARE...FORUM RULES
2014 dell XPS8700
intel core i5 4400@3.10ghz
12 gigs DDR3 ram
NVDIA GeForce GT635
Win 10 /64 bits OS
Realteck 7.1
Home USB sound dogle
Asus VE247H monitor
Logitec G-15 ser 1 gaming keyboard
U-Mix Control Pro 2
User avatar
daniel clark
 
Posts: 6853
Joined: 31 Oct 2008, 00:01
Location: Charleston,S C


Previous

Return to Technical support




Who is online

Users browsing this forum: No registered users and 18 guests

 
 
   
 
© 2014 Mixvibes