MIXVIBES Dj Community old forum

Closed forum. You can only use it as a source of information about MixVibes software
http://forum.mixvibes.com/

Vinyl Revolution Pack 20 Mixer Problem

http://forum.mixvibes.com/viewtopic.php?f=370&t=14309

Page 1 of 2

Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 17 Aug 2009, 02:14
by DextroE
Hello community!

As the title says, I have a problme with my mixer.

It's the DJ-Tech MX 2 Channel Mixer.
Everything works fine but the crossfader and the volumefader for channel 1 and 2 + the master gain knob doesn't work.

Is this a configuration problem or a hardware problem ?

Please help me! Otherwise I'll send this pack back !

If you need any Information just say it and you'll get it.

Sincerly DextroE

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 17 Aug 2009, 11:32
by N-deep
Hello,

Did you download and install the latest updated version? Can you post a configuration report?

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 17 Aug 2009, 16:33
by DextroE
Hello and thank you for your fast reply.

I downloaded the Update from the Download Center.

Config Report:
Config 2009/08/17 16:11

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 16 Model 2 Stepping 3, AuthenticAMD
MixVibes DVS version=6.412 DLL langage=US version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=Yes
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=6 Nb Output=16
Managment Type ASIO
1-IDT Audio1 1 2-IDT Audio1 2
3-Sound Device 1 4-Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=4:USB Audio CODEC 1-USB Audio CODEC 2
Mode=Absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-80.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.140 Volume max left=0.374 Volume max right=0.385 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=0.999 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:USB Audio CODEC 1-USB Audio CODEC 2
Mode=Absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-80.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.442 Volume max left=0.411 Volume max right=0.405 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=0.999 Speed Average(3s)=1.001

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 17 Aug 2009, 17:01
by N-deep
Did you set the left channel to the output #1 and the right channel to the output #2?

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 17 Aug 2009, 17:28
by DextroE
Yes, it works now!

But my main problem is the mixer.

The crossfader + both volumefader + master knob don't work.

Is the mixer out of order or a configuration mistake ?

MfG DextroE

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 17 Aug 2009, 17:43
by N-deep
What MIDI preset file did you choose? When you move the crossfader or gain button is there any movement on the screen?

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 17 Aug 2009, 21:44
by DextroE
No there is no movement on the screen.

But thanks for the hint. I'll try it.

Edit:

There is no MIDI Setup in my version of MixVibes

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 18 Aug 2009, 10:55
by N-deep
You're right sorry about the MIDI confusion.

How did you connect the mixer to the computer? Are you using an external soundcard?

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 18 Aug 2009, 17:05
by DextroE
I use a small external usb card and my internal soundacrd.
The turntables are connected with usb.

Re: Vinyl Revolution Pack 20 Mixer Problem

PostPosted: 18 Aug 2009, 17:09
by N-deep
DextroE wrote:I use a small external usb card and my internal soundacrd.

Can you describe how did you connect it to the mixer?
All times are UTC + 1 hour [ DST ]
Page 1 of 2
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/