MIXVIBES Dj Community old forum

Closed forum. You can only use it as a source of information about MixVibes software
http://forum.mixvibes.com/

<solved> CANNOT CALIBRATE CDJ 100

http://forum.mixvibes.com/viewtopic.php?f=370&t=13605

Page 1 of 1

<solved> CANNOT CALIBRATE CDJ 100

PostPosted: 31 May 2009, 16:03
by somey
Hi there, i cannot calibrate my Pioneer Cdj100. My MKII calibration is fine but with Cdjs calibration cannot complete.
the timecode quality at technics is 100% but in cds its 0%.
of course i've changed the settings at the options menu at vinyl/CD input, i have changed the RCA cables (removed the technics RCA and added in the MAYA44 soundcard the CDJ100).
but it doesn't work even if at the calibration menu , the cds can be found, can save their position, but the timecode quality is still at 0%.

any ideas?

Athens/Greece


OS Windows XP
CD's CDJ100 Pioneer
Soundcard MAYA44 USB
Mixvibes Version DVS7.100
(calibration is not possible even if i did the update to 7.218 version).

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 31 May 2009, 16:25
by wazza
hi Somey...welcome to the mixvibes forums

can you post a config report ..so we can see your setting in mixvibes
go Preferences / config report....when you do a config report play the time code C.D in your C.D player & set the pitch to 0

copy the config file & paste it in your forum post
Config Report:
use the config report tab up in the forum post tool bar

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 31 May 2009, 16:43
by somey
i will post it here later when i get home.
thank u

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 31 May 2009, 19:15
by somey
ok here is the report:

---------------------------------------------------

Config Report:
Config 2009/05/31 19:56

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34083072
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-OUT 0 - MAYA44 USB 2-OUT 1 - MAYA44 USB

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - MAYA44 USB-IN 1 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=1.000 Volume max right=1.000 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=CD
Audio=ASIO source=2:IN 2 - MAYA44 USB-IN 3 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=10270 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=1.000 Volume max right=1.000 Volume optimum=0.370
Speed Average(100ms)=1.095 Speed Average(1s)=1.102 Speed Average(3s)=1.101

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 02 Jun 2009, 17:20
by N-deep
How is the timecode signal? Do you see a sinusoide curve?

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 03 Jun 2009, 17:28
by somey
yes i can see sinusoide curve, its diferent from vinyls (as the manual says) but the signal is still on 0%.

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 03 Jun 2009, 17:48
by N-deep
somey wrote:yes i can see sinusoide curve, its diferent from vinyls (as the manual says) but the signal is still on 0%.

Can you post a screenshot of it?

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 03 Jun 2009, 18:08
by somey
no right now, i will.

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 03 Jun 2009, 19:20
by djegun
* Check that your vinyl/cd config is like on the first attached picture (player 2)
* Check that your audio config is like on the attached picture

Re: CANNOT CALIBRATE CDJ 100

PostPosted: 07 Jun 2009, 15:02
by somey
Solved!!

thank you very much!!!!
All times are UTC + 1 hour [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/