MIXVIBES Dj Community old forum

Closed forum. You can only use it as a source of information about MixVibes software
http://forum.mixvibes.com/

Very poor sound quality

http://forum.mixvibes.com/viewtopic.php?f=370&t=13431

Page 1 of 3

Very poor sound quality

PostPosted: 17 May 2009, 21:31
by melkker
Hello,

I have a huge problem with my mixvibes. It just wont work!
I have tried everything discussed from these forums here, nothing helps. My first problems are cracks in the sound. I don't know where they come from or what causes them. I have tried many setups, installed many different versions of DVS and sound card drivers. Nothing helps.
Second problem is that Mixvibes is most unreliable DVS system in my opinion. Even if I got my sound quality somenear normal(only with the cracks mentioned earlier) nest time I plug it in, I most certainly must recalibrate vinyls and today a massive distorted noise surprised me. The noise is so terrible, it's almost impossible to recognize the song what is played. I turned my laptops wifi off, the sound got even worse. If I turned wifi on, the sound got much clearer(but still with cracks) and after few moments its back distorted and terrible.

I dont know what to do. I have tried everything. I have tried it on 3 different computers, installed every update available, installed even older versions of the drivers and DVS, but nothing helps. But somehow people are using this system. So maybe there is any help for my situation.

My config
Config Report:
Config 2009/05/17 22:14

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 17 Model 3 Stepping 1, AuthenticAMD
MixVibes DVS version=7.010 DLL langage=US version=7.000

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Style=XP2005
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=Absolute
Riaa=Yes Preamp Left=-1 db Preamp Right=-1 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=Absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Re: Very poor sound quality

PostPosted: 17 May 2009, 22:42
by gakto2009
we need some more information on your system setup vefore we can help you propper..

regards,
Bryan

Re: Very poor sound quality

PostPosted: 18 May 2009, 08:24
by melkker
Hello,

Which information more do you require?

Computer :
HP Compaq 6735s
AMD Turion 64 X2 ZM-84 (2,3 GHz)
2 GB DDR2 800 MHz
320 GB 5400rpm SATA
ATI Mobility Radeon HD 3200
Microsoft Windows XP Professional

Mixvibes :
DVS 7 pack MK2

I use only vinyls with 2x Numark TT200 and stanton SA 5 mixer.

Re: Very poor sound quality

PostPosted: 18 May 2009, 08:28
by UncleVibes
go to the download section & update first your software to DVS 7.21
Install it & follow all instructions
Publish again a config report.
Did you update first from version 6 DVS or did you get directly version 7?

Re: Very poor sound quality

PostPosted: 18 May 2009, 08:31
by melkker
Hi,

I got directly the version 7.

Re: Very poor sound quality

PostPosted: 18 May 2009, 08:40
by UncleVibes
Thank you update this version to 7.21 here Update DVS 7.21 & releases notes

Re: Very poor sound quality

PostPosted: 18 May 2009, 17:01
by melkker
Hi,

I updated DVS, my config report is here.
Config Report:
Config 2009/05/18 17:46

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 17 Model 3 Stepping 1, AuthenticAMD
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=3 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=-1 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.581 Volume max right=0.581 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=1 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.499 Volume max right=0.499 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Re: Very poor sound quality

PostPosted: 18 May 2009, 17:14
by N-deep
What driver version did you install?

Re: Very poor sound quality

PostPosted: 18 May 2009, 18:05
by melkker
I installed 7.218

Re: Very poor sound quality

PostPosted: 18 May 2009, 18:35
by N-deep
This is not a driver ID. Open the soundcard control panel and look for the about menu.

Are the input switchs located in front of the device are on phono position?
All times are UTC + 1 hour [ DST ]
Page 1 of 3
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/