no output signal

   Forum closed (read only)
Forum rules
PLEASE.READ.FORUM.RULES.SUPPORT.UPDATE


FORUM CLOSED PLEASE POST in NEW TECHNICAL FORUMS BY SOFTWARE FAMILY

* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.

no output signal

Postby wannes951 on 18 Mar 2009, 22:08

i use a maya 44 soundcard and the newest DVS software, but once the soundcard do not give an output signal on output 2, very strange, if i change my cd players the problem remains, so i think the soundcard is broken down or is there a solution?
wannes951
 
Posts: 10
Joined: 12 Feb 2009, 18:05


Re: no output signal

Postby gakto2009 on 19 Mar 2009, 00:23

can you publish a config report for us please.

regards,
Bryan
..!.. ..!.. NO SUPPORT BY PM ..!.. ..!..

Image
gakto2009
 
Posts: 1275
Joined: 16 Aug 2006, 14:41
Location: Scotland


Re: no output signal

Postby wannes951 on 19 Mar 2009, 17:41

this is when my cd players are both playing
Config Report:
Config 2009/03/19 16:28

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34083072
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-OUT 0 - MAYA44 USB 2-OUT 1 - MAYA44 USB
3-OUT 2 - MAYA44 USB 4-OUT 3 - MAYA44 USB

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - MAYA44 USB-IN 1 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.548 Volume max right=0.666 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.002 Speed Average(3s)=1.001


Vinyl2 connected=CD
Audio=ASIO source=0:IN 0 - MAYA44 USB-IN 1 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
wannes951
 
Posts: 10
Joined: 12 Feb 2009, 18:05


Re: no output signal

Postby gakto2009 on 19 Mar 2009, 19:37

Do both the left and right players come from the left chanel?
..!.. ..!.. NO SUPPORT BY PM ..!.. ..!..

Image
gakto2009
 
Posts: 1275
Joined: 16 Aug 2006, 14:41
Location: Scotland


Re: no output signal

Postby wannes951 on 19 Mar 2009, 20:26

no, I had connected cd player 1 on input 1 and 2 and cd player 2 on input 3 and 4. and the outputs are connected to my mixer, but when i play the cd players, on input 1 and 2 is there an output signal, on input 3 and 4 not. but the led's on input 3 and 4 are burning, so maybe the card is brokendown?
wannes951
 
Posts: 10
Joined: 12 Feb 2009, 18:05


Re: no output signal

Postby UncleVibes on 20 Mar 2009, 06:31

Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - MAYA44 USB-IN 1 - MAYA44 USB
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db


Vinyl2 connected=CD
Audio=ASIO source=0:IN 0 - MAYA44 USB-IN 1 - MAYA44 USBMode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

You use the same source for your right deck & for the left deck so it's normal you can't get the signal through. Just go in the vinyl option & select your right source & click on apply. It should work now.
UncleVibes
 
Posts: 10254
Joined: 22 Sep 2003, 14:36



Return to Technical support




Who is online

Users browsing this forum: No registered users and 9 guests

Board index

 
 
   
 
© 2014 Mixvibes