MIXVIBES Dj Community old forum

the same thing happened the last time i installed mixvibes on another PC. I get this really loud crunchy/ distorted sound, even though i can still here the music (which is in terrible quality)
I really cant rember what i did last time to fix it, heres my config report if anyone is kind enough to offer ny sugestions:

Config 2009/02/17 19:16

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=10 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-U46MK2 Ch123456 1 2-U46MK2 Ch123456 2
3-U46MK2 Ch123456 3 4-U46MK2 Ch123456 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U46MK2 Ch123456 1-U46MK2 Ch123456 2
Mode=absolute
Riaa=Yes Preamp Left=-1 db Preamp Right=-2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=70.424 Volume max left=0.420 Volume max right=0.410 Volume optimum=0.370
Speed Average(100ms)=1.006 Speed Average(1s)=1.010 Speed Average(3s)=1.009


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U46MK2 Ch123456 3-U46MK2 Ch123456 4
Mode=absolute
Riaa=Yes Preamp Left=6 db Preamp Right=5 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.540 Volume max left=0.357 Volume max right=0.298 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000

i think you probably have to change ASIO driver versions, I roll with version 1.0.39 for U46DJ, it's rock solid ! you can dwld right here :

http://download.esi-audio.com/?w=esi&p=26&g=2&l=en

Yes and no.
Asio4all solution is the most reliable driver on the market. Something else is wrong. Are you sure you use asio4all 2.9 final & not 2.8 beta?

well the thing is i downloaded the asio4all driver cause i couldnt get the u46mk2 driver to work on this PC :s
On my other PC it worked fine, but i ha the same problem the first time i installed. Ill post the config report usin the u46 in abit. (My set is in my garage, and right now im sure the temp is below 0 degrees c lol, i have to wait till the heater warms it up abit)

justinryan wrote:(My set is in my garage, and right now im sure the temp is below 0 degrees c lol, i have to wait till the heater warms it up abit)

I'm not sure that a computer can work properly below 0 degrees C°... To me you should move the computer to another room.

Computers will work good at a minimum 0 C (celsius). Problems could appear if not in a controlled location , the case could form moisture if the temperature is not constant , and small drops of water on the circuits will fry them . But there are some points like the CPU (processor) and GPU (graphics processing unit)that can be cooled down with FREON at about -20 C .

it has been reported that come CPU's will work at as low as -192 C (celsius). However some HDD's like western digital will not work properly blow +10 C (celsius).