Page 1 of 1

Hey i have problem with mixer?

PostPosted: 30 Jan 2009, 15:40
by djmaxos
Hi

I connect the mixer with u46mk2 and not work only turntable works.
My mixer is Numark DXM 06 and Turntable STR8-150

Here is my mixer and rca cables:
Mixer:http://img502.imageshack.us/img502/2158/img0938oh4.jpg

Mixer Front:http://img222.imageshack.us/img222/7118/img0939jr9.jpg

U46mk2:http://img207.imageshack.us/img207/3191/sta0934kb2.jpg

U46mk2 Front:http://img207.imageshack.us/img207/3832/sta0935ts1.jpg

Help me

Re: Hey i have problem with mixer?

PostPosted: 30 Jan 2009, 16:33
by TheRealChaos
Place your mixer once on line.
Then I think it should go.

Have you seen the video?
Perhaps it helps you more ..
viewtopic.php?f=271&t=10230

Re: Hey i have problem with mixer?

PostPosted: 30 Jan 2009, 18:53
by wazza
hi DJ Maxos...A newbee...welcome to the mixvibes community

by the pic''s it looks like you have have everything setup OK for one turntable

switch the mixer to line on both channel 1 & 2...

1)... in mixvibes click Options / sound card ...click on Asio box
in the out-put device box you should see & choose your U46 DJ MK2 sound card ...and set your out-put number box to 2 ....now click the set-up box to see if mixvibes see your in-puts & out-puts on to channels 1 & 2 if all good click OK.!!


2)....now go into mixvibes and do your in-stall wizard....(go preferences / in-still wizard....& do the set-up...{ when you come to where you do the set-up for turntable 2 click not connect...and at the end off the in-still wizard click on low GUI priority for good time code vinly

3) ....now go back to Options /... vinly/C.D input page
down the bottom of the page you will see the Advanced box ...click on Advanced box / click on ONE ACTIVE TURNTABLE BOX / ...Click OK


.........there are 3 way you can use one turntable in mixvibes
you can use the Tab key on your laptop key-board to control deck 1 or 2 in mixvibes

you can use the Ctrl key + on your keyboard + drag & drop from deck 1 to deck 2 to CLON the track 1 into deck 2 for some juggling fun

or just drag & drop from one deck to the other

Re: Hey i have problem with mixer?

PostPosted: 30 Jan 2009, 19:12
by wazza
now some QUESTIONS for you....

are you using one turntable or two..????....by the look of the pic ( pic 3 ) you only have one turntable plug in

what u46 DJ sound card driver up-date are you using ????

what mixvibes up-date are you using ...try mixvibes up-date 6.4.11
or better 7.0.34 if you can get it for one turntable mode
there is a BUG in 7.2 but there is a FIX on the way

can you post a config report so we can all see your setting

Re: Hey i have problem with mixer?

PostPosted: 31 Jan 2009, 09:37
by TheRealChaos
does it work now?

Re: Hey i have problem with mixer?

PostPosted: 31 Jan 2009, 18:25
by Psykadelik
Hey guys, I was able to help him out through DJForums.com.


http://www.djforums.com/forums/showthread.php?t=177246&page=2


Everything is cool now.

Re: Hey i have problem with mixer?

PostPosted: 31 Jan 2009, 21:53
by wazza
thank for the help Psykadelik...good work my friend