Page 1 of 2
[solved]problems, ASIO, callibration
Posted:
07 Jan 2009, 16:37by ac1
i have had mixvibes now for a couple of week s and still have not been able to use it. the 1st problem with the callibration. deck 1 would not callibrate. but as i went to try and sort it out. in the install wizard it was saying the ASIO isnt presesent. so i have uninstalled everything and then tryed reinstalling and now nothing appears when i connect U46 into the laptop. dont no whats going on. did i pay all this money just to keep getting fustrated. can any1 help?
please[code][/code]
Re: problems, ASIO, callibration
Posted:
07 Jan 2009, 17:01by N-deep
Did you install the U46MK2 ASIO driver?
[PC] [WIN XP,VISTA32bit] U46MK2 v1.041
Re: problems, ASIO, callibration
Posted:
07 Jan 2009, 23:09by ac1
i did the 1st time but when i was having problems with the calibration i uninstalled everything and now when i reinstall it, sometimes when i connect the U46 via the USB it recognises it and says it has properly installed and then doesnt appear when i go through the install wizard. and sometimes when i plug the usb in it doesnt recognise it. also the mixvibes logo doesnt come up in the bottom right hand corner of the screen.
Re: problems, ASIO, callibration
Posted:
08 Jan 2009, 10:52by N-deep
What driver version are you talking about? You need to install version 1.0.39 or 1.0.41 to get it work perfectly.
Re: problems, ASIO, callibration
Posted:
08 Jan 2009, 23:07by polocorp
make sure you always use the same USB port as during the installation.
Re: problems, ASIO, callibration
Posted:
10 Jan 2009, 15:38by ac1
when i try and install the U46 half way through it says theres a problem and says it will notify when solved. and the mixvibes icon dissapeared how do i manually install the soundcard?
and how do i no what the driver is?
Re: problems, ASIO, callibration
Posted:
10 Jan 2009, 15:43by UncleVibes
fully uninstall the drivers & reload them
drivers should be version 1.041 on download here.
[PC] [WIN XP,VISTA32bit] U46MK2 v1.041Wait to plug the sound card for the panel asking you to do it when you install the drivers.
Re: problems, ASIO, callibration
Posted:
10 Jan 2009, 18:32by ac1
cheers i have sorted out the soundcard problem and an biw back to the original problem that i can not work out. when i go through the install waizard, when i get to the calibration part it says that turntable 1 is not callibrating succesfully, where as turntable 2 calibrates fine. the needles and the vinyl are fine. how can i get turntable 1 to calibrate so i can start mixing?
Re: problems, ASIO, callibration
Posted:
11 Jan 2009, 09:16by UncleVibes
Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=-3 db Preamp Right=-3 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.439 Volume max right=0.536 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=7 db Preamp Right=7 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db
Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.346 Volume max right=0.365 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Write a value of 4db on both preamp instead of -3db & +7db. Click on apply. What happens do you get a better code reception & some scratch feeling in absolute mode?
Re: problems, ASIO, callibration
Posted:
13 Jan 2009, 18:40by ac1
i think i have sorted out the callibration now, il keep u informed. one more thing, i cant get the tool bar at the top of the mixvibes page to appear. anyone know how i can make it appear?