MIXVIBES Dj Community old forum

i have just got the mixvibes DVS mk2 pack and have installed it but when it came to the calibration i can only get turntable 2 to calibrate succesfully. i have changed the needles and the vinyl round but still doesnt seem to be the case, the needles are a bit worn tho.

anyone had the same problem or know how i can get both turntables to work?

help me out, im dyin to use it.

Hi ac1,

can you please post a configuration report generated with both vinyls playing at 0 pitch.

regards
Bryan

my config report.

Config 2008/12/30 11:20

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=-8 db Preamp Right=-8 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.387 Volume max right=0.388 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=8 db Preamp Right=8 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=97.975 Volume max left=0.340 Volume max right=0.371 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=0.999 Speed Average(3s)=1.000

When I installed Mixvibes a couple of months back I had the same problem.
I think you should Uninstalled the software and driver, and then:
1> Install mixvibes
2> download Update of mixvibes (7.1)
3> download u46MK2 driver update (1.041)
4> Install Update of mixvibes
5> Install driver
6> Restart computer (with Mixvibes hardware off!!)
wait 10 seconds
7> Turn Mixvibes hardware ON
wait 10 seconds
8> Launch the Mixvibes software

This helped me out