Page 1 of 1

Bypass and preamp problem

PostPosted: 27 Dec 2008, 20:44
by dju
Hi everyone,

I own 2 Stanton STR8.150 decks that I use with Mixvibes DVS. I use the line ouputs of the decks, which works fine for vinyl control, but when I switch the bypass on, the sound is loud and distorded, much like if a preamp was on. I have set "Phono input : no" to both players in the options. Thanks for help

Config Report:
Config 2008/12/27 19:40

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 6, GenuineIntel
MixVibes DVS version=7.214 DLL langage=FR version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=No TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=190
Loop in bar boundaries=Yes Security=No History=No
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-101 AsioVersion=0 DriverVersion=268
Latency=7 Driver sampling=96000 Nb Input=10 Nb Output=10
Managment Type ASIO
1-LineOut 3&4 left 2-LineOut 3&4 right
3-LineOut 5&6 left 4-LineOut 5&6 right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=2:LineIn 3&4 left-LineIn 3&4 right
Mode=absolute
Riaa=No Preamp Left=11 db Preamp Right=10 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=4:LineIn 5&6 left-LineIn 5&6 right
Mode=absolute
Riaa=No Preamp Left=9 db Preamp Right=9 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Re: Bypass and preamp problem

PostPosted: 27 Dec 2008, 20:55
by phadedvision
Moved to help section as this seems to not be more of a setup issue.

Re: Bypass and preamp problem

PostPosted: 29 Dec 2008, 15:10
by djegun
Do you have that with 7.1 version?

Re: Bypass and preamp problem

PostPosted: 31 Dec 2008, 16:11
by dju
Yes, so I installed 7.21 and I still experience the issue.