MIXVIBES Dj Community old forum

i recently purchased a mixvibes DVS 7 with a maya 44 interface. i got threw the installation, now im having a problem with the calibration of my cd players and when i did get it some what working it doesnt to its normal state in vinyl mode. the pitch is very slow and the song sorts of reverses itself and i cant figure anything else out..any can help..PLEASE!!!!!

Welcome to the forums

Could you please post a config. report so it could help us spot your problem a little better?

Peace

ok im new at mixvibes whats that?

a config report is a list of your setting in mixvibes
to make a config report go PERFERENCES / CONFIG REPORT
that will make list of your setting ...now copy & paste in the forums so we all can see your setting

your config report should look like this


when you make the config report ...play both your C.D players or turntable with the time code C.D's or vinly and put the pitch 0%

here is a link to the mixvibes FAQ...
http://www.mixvibes.com/site/pageeng/page.php?x=faq
There is alot off good info on this page...that will help you

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes Producer version=7.033 DLL langage=US version=7.030

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=3 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-66 AsioVersion=0 DriverVersion=275
Latency=7 Driver sampling=44100 Nb Input=6 Nb Output=6
Managment Type ASIO
1-LineOut 1&2 left 2-LineOut 1&2 right
3-LineOut 3&4 left 4-LineOut 3&4 right
5-SpdifOut left 6-SpdifOut right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MicIn1 left-MicIn1 right
Mode=Relative time
Riaa=No Preamp Left=44 db Preamp Right=44 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.320 Volume max left=0.273 Volume max right=0.288 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=0.999 Speed Average(3s)=1.000


Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected

thats my config report...so were is yours

lol

Config 2008/12/26 23:21

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 1 Stepping 2, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=No AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=No
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34083072
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-OUT 0 - Maya44 2-OUT 1 - Maya44
3-OUT 2 - Maya44 4-OUT 3 - Maya44

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - Maya44-IN 1 - Maya44
Mode=absolute
Riaa=No Preamp Left=6 db Preamp Right=0 db Noise Filter=40 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:IN 2 - Maya44-IN 3 - Maya44
Mode=absolute
Riaa=No Preamp Left=6 db Preamp Right=0 db Noise Filter=40 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

when you did the config report ...did you have the time code C.D's playing ????....because your time code is 0.000%...you should have it at 90 to 100 %

Time code percent=0.000

and try to run mixvibes in RELATIVE or all RELATIVE ...not absolute mode

Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - Maya44-IN 1 - Maya44
Mode=absolute


some other thing to check with your C.D players
1)....turn off your AUTO CUE
2)...Don't use the master tempo on your C.D Players

so how do i set up my configuration report..im sorry i just purchased this software and not very familar with it ..i just need detailed instructions on what to do after the cd installation.