How to connect my mixer with MIXVIBES?

[Jungleyes]

Hello to everybody!
Sorry if this question has been posted before but if possible I would like to enlight me in How Can I Connect a simple 3 Channel "TELE" mixer with the software!
The main thing is that I want to listen through my mixer the left channel for example when the right is one the air so to be able to know when make the crosfading etc...In other words I would like to set the bpm and the cue time etc...through the software but make the mixing analog with the mixer!
Thank you in advane...!

P.S. The question is placed mostly because I can't listen when using the software only what each channel plays when is off air..!

[wazza]

hi jungleyes....welcome to the mixvibes forum's

you need a sound card that has 3 stereo out-put's

In MIXVIBES go Options / sound card page /choose your sound card mode...(ASIO , KERNEL , MULTI CHANNEL or MULTI AUDIO)
i use ASIO .....in the ASIO BOX is a little box with OUT-PUT NUMBER
set the to 3 ...now click the setup box to see if mixvibes see your out-puts....if yes click "OK"
NOW !!!....On the main mixvibes screen up the top in the tool bar
you will see a little box with the number 2 ...set that to 3 ( that will give you 3 decks )
NOW .!!.... You have to set the out-puts on the main screen in each deck
set deck A to 1......deck B output 2 ....and deck C out-put 3
look at this pic to see the output box on the skin

[polocorp]

hi Jungleeyes, welcome on the forum ! So what sound card do you own ?

[Jungleyes]

hi jungleyes....welcome to the mixvibes forum's

you need a sound card that has 3 stereo out-put's

In MIXVIBES go Options / sound card page /choose your sound card mode...(ASIO , KERNEL , MULTI CHANNEL or MULTI AUDIO)
i use ASIO .....in the ASIO BOX is a little box with OUT-PUT NUMBER
set the to 3 ...now click the setup box to see if mixvibes see your out-puts....if yes click "OK"
NOW !!!....On the main mixvibes screen up the top in the tool bar
you will see a little box with the number 2 ...set that to 3 ( that will give you 3 decks )
NOW .!!.... You have to set the out-puts on the main screen in each deck
set deck A to 1......deck B output 2 ....and deck C out-put 3
look at this pic to see the output box on the skin

Ok I will have first to check what sound card I have...and then I will try...thank you!

[Jungleyes]

hi Jungleeyes, welcome on the forum ! So what sound card do you own ?

"Realtek High Definition Audio 6.0.1.5700"

I am not sure if it has 3 stereo outputs...hao can I check it..?

[Jungleyes]

hi jungleyes....welcome to the mixvibes forum's

you need a sound card that has 3 stereo out-put's

In MIXVIBES go Options / sound card page /choose your sound card mode...(ASIO , KERNEL , MULTI CHANNEL or MULTI AUDIO)
i use ASIO .....in the ASIO BOX is a little box with OUT-PUT NUMBER
set the to 3 ...now click the setup box to see if mixvibes see your out-puts....if yes click "OK"
NOW !!!....On the main mixvibes screen up the top in the tool bar
you will see a little box with the number 2 ...set that to 3 ( that will give you 3 decks )
NOW .!!.... You have to set the out-puts on the main screen in each deck
set deck A to 1......deck B output 2 ....and deck C out-put 3
look at this pic to see the output box on the skin

Ok I will have first to check what sound card I have...and then I will try...thank you!

My sound card is:
Realtek High Definition Audio 6.0.1.5700
but I don't know if has 3 stereo outputs

[N-deep]

Check at the back of the computer

[polocorp]

you need an external USB or FW soundcard with dual outputs to route the sound into the channels of your mixer.

The U46 MK2 is an affordal and popular solution with our community, but any other ASIO compliant sound device is ok