MIXVIBES Dj Community old forum

Closed forum. You can only use it as a source of information about MixVibes software
http://forum.mixvibes.com/

[SOLVED] Sound Problems

http://forum.mixvibes.com/viewtopic.php?f=370&t=11023

Page 1 of 1

[SOLVED] Sound Problems

PostPosted: 08 Nov 2008, 17:34
by abernard
I have just installed DVS Pk Mk2. I have played around with my settings with no success.

It often plays well then every so often it sounds as if the needle is dirty. The needle if fine and my system should be capable for doing what i want.

Is it possible that my stylus & cartridge may not be suitable? I use Stanton 680s as i dont do much scratching.

Setup:
EeePC901
Technics 1210s

Here it is :)

Config Report:
Config 2008/11/08 18:17

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 28 Stepping 2, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=No
Display Pitch=No Auto Match at load=No
Bpm Range min=100 max=140
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=48000 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=7 db Preamp Right=5 db Noise Filter=1 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.520 Volume max right=0.368 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=9 db Preamp Right=8 db Noise Filter=1 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.505 Volume max right=0.505 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Re: Sound Problems

PostPosted: 08 Nov 2008, 17:55
by wazza
hi Abernard...welcome to the mixvibes community
can you please post a config report so we can see your setting

Re: Sound Problems

PostPosted: 08 Nov 2008, 20:04
by UncleVibes
hi Abernard...welcome to the mixvibes community
can you please post a config report so we can see your setting


Yes it's the only way, welcome! Config report is done from the software: check for files->config report

Re: Sound Problems

PostPosted: 08 Nov 2008, 22:45
by polocorp
hi abernard, which U46 driver version are you using. It sounds like you need to update with version 1.039 (available in the download center). please make sure you deinstall the present version first. Hope this helps :D

Re: Sound Problems

PostPosted: 09 Nov 2008, 18:20
by abernard
Thanks for your advice. I now have the latest drivers and updates, but i still have the same problem.


latest config
Config Report:
Config 2008/11/09 16:10

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 28 Stepping 2, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=100 max=140
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=7 db Preamp Right=5 db Noise Filter=1 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=9 db Preamp Right=7 db Noise Filter=1 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Re: Sound Problems

PostPosted: 10 Nov 2008, 00:33
by polocorp
Have you checked on all your background services ? DO you deactivate anti-virus, fire-wall etc ? If the sound is altered periodically only for a shirt moment this is possibly a background service taht is giving MV a hard time.

the advice i constantly give to DJs who want to get serious about reliability os to install a dedicated Windows partition just for MixVibes and then follow on optimization tutorial to make Windows as light as possible. Unfortunately PCs are always clogged by background activity !

Re: Sound Problems

PostPosted: 12 Nov 2008, 13:17
by Dj NB
True!!! I've tried to optimize and it helped a lot!!!

Re: [SOLVED] Sound Problems

PostPosted: 13 Nov 2008, 17:33
by abernard
Hi Polocorp

You were right. I thought i had checked everything. My laptop is new and a little icon in sys tray which allowed me to tick super performance.

Now im mixing up a storm

Thanks!!!

:D

Re: [SOLVED] Sound Problems

PostPosted: 13 Nov 2008, 18:10
by polocorp
Good to hear :) thanks for getting back to us. Hope you post your mixes here soon :mrgreen:
All times are UTC + 1 hour [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/