Help.. I don't know whats the problem.. (update? soundcard?)

[mindster]

I've been using Mixvibes for a couple of months and I had a bit of a start up problem. It was al working until previous week; when I downloaded the DVD7100 update and the U46dj update.
I have been trying a couple of hours but everytime there was a new problem. I have had this problems:
* He didn't recougnised the timecode vinyls
* Drivers failed to install (at the end of the installation, the installation crashed)
I have Uninstalled and downloaded it again, and installed it again for a couple of times but now I have the following problems:
* When I load music and play them with the timecode vinyls I hear a loud PEEEEP, (both channels)
* I Could not records anymore (first I could > true the MIC channel of my laptop, and the REC of my mixer)
* I can't change the values in my U46 1.039 driver (latency, sample rate)???

PLEASE Can somebody tell me what I am doing wrong...
I can't find a readme file, that says the exact steps, of what to do first!!
How can I records true the mic channel again?
What are good values for the latency, sample rate?
There must be some kind of readme file or a PDF where I can read everything!!
The manual is just totally useless:(

[mindster]

Config Report:

Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1- 2-

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=2:USB-audioapparaat 1-USB-audioapparaat 2
Mode=absolute
Riaa=No Preamp Left=4 db Preamp Right=4 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=4:USB-audioapparaat 3-USB-audioapparaat 4
Mode=absolute
Riaa=No Preamp Left=6 db Preamp Right=6 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=76036 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[N-deep]

The beginning of the config report is missing. Can you post it again?

[mindster]

Config Report:

Config 2008/11/04 12:54

OS=Microsoft VISTA build=6000 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 104 Stepping 1, AuthenticAMD
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=19 Driver sampling=44100 Nb Input=6 Nb Output=6
Managment Type ASIO
1-USB-audioapparaat 1 2-USB-audioapparaat 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=2:USB-audioapparaat 1-USB-audioapparaat 2
Mode=absolute
Riaa=No Preamp Left=5 db Preamp Right=4 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.834 Volume max left=0.396 Volume max right=0.372 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=4:USB-audioapparaat 3-USB-audioapparaat 4
Mode=absolute
Riaa=No Preamp Left=5 db Preamp Right=6 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=76036 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=94.368 Volume max left=0.342 Volume max right=0.060 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=1.000 Speed Average(3s)=1.000

[N-deep]

Well the timecode seems to be well detected. Moreover you are not using the 1.0.39 driver but the ASIO4ALL one...Did you use the install wizard to calibrate and setup the software?

[mindster]

I have installed the drivers with the instal wizard, but at the final step the installation failed... It takes a couple of minutes and then there is some kind of error...
I will try again I suppose..
I don't have to uninstall Asio4All?
thanks!:)

[polocorp]

that's right. you only want to use one ASIO driver at a time. Please deinstall all drivers and reinstall only 1.039

Also you should try to reinstall the upgrade in a different folder.

[polocorp]

how are we doing here mindster, did you reinstall the drivers ? Hope your silence means things are working !

[mindster]

Thanks!
Tonight I have updated and installed everything again, and it is working.
I'm working with U46MK2 v1.034,
the latest version had some problems with the setup.
Do you have suggestions about the Sample rate and Latency?
Thanks for your help!

[wazza]

the u46 sound card works ok at 44.1

by the look at your config report ...your latency is very hi ( 19 ms )
you should be able to get it down to about 6 or 7 ms with no click''s or pop''s....try 64 samples or 128 samples


Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=19 Driver sampling=44100 Nb Input=6 Nb Output=6
Managment Type ASIO
1-USB-audioapparaat 1 2-USB-audioapparaat 2