edirol fa 66 users ?

[mydogrizla]

hello
i have just bought a edirol fa 66 please could some one tell me there settings in mixvibes ? i am using v2 vinyl with the latest updates but i am getting really bad drifting any help would be great
thanks mydogrizla

[UncleVibes]

post a config report

[mydogrizla]

Config Report:

Config 2008/06/22 12:34

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 7, GenuineIntel
MixVibes DVS version=7.033 DLL langage=US version=7.030

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=No AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=No Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-66 AsioVersion=0 DriverVersion=553
Latency=4 Driver sampling=44100 Nb Input=6 Nb Output=6
Managment Type ASIO
1-LineOut 1&2 left 2-LineOut 1&2 right
3-LineOut 3&4 left 4-LineOut 3&4 right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MicIn1 left-MicIn1 right
Mode=Absolute
Riaa=No Preamp Left=50 db Preamp Right=46 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.390 Volume max right=0.383 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:LineIn 3&4 left-LineIn 3&4 right
Mode=Absolute
Riaa=No Preamp Left=50 db Preamp Right=47 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=0 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.352 Volume max right=0.352 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000

HOPE THIS HELPS UNCLE VIBES
THANKYOU

[mydogrizla]

could some one please post there config report for there fully working edirol fa 66 set up for me thankyou ...................

[UncleVibes]

If you get your output already well set, try to give 47 db both sides of the vinyl preamp (manual & click apply) or check the needles. It seems you have 4db difference between each channel.
Do you have vista drivers?
I got an fa101 (same sound card but with more inputs & outputs) I use it with 3ms latency & it works well all the time without drift.

[mydogrizla]

try at 47 on both channels still the same ? i have vista drivers for my sound card yes ? my needles are 2 weeks old

i cant understand why its not working ????????

H E L P

[mydogrizla]

Its work ok if im just scratching or playing a track but when i spin the vinyl back or forwards the wav form is not responding as it shud , if i spin back it goes back and forward ???? do you have this problem ?/

[mydogrizla]

could it be a setting on my soundcard causing this ?

[UncleVibes]

I don't have the answer, I am very happy with my edirol & it isn't a mixvibes sound card. I got 95 to 100% of codes found and I got this sound card since now more than 3 years.
If drivers & needles are ok? What else? Your Vista config maybe. I had a problem last week while testing Cross, it was very slow & more. So I checked Windows update & found that after all updates it was working ok...

[mydogrizla]

yes it is all very well for you saying mine works fine ! thats why i bought this card because i knew the team used it , i have bought new turntables and sound card and needles to try and get mixvibes working correct i have 2 PC s one with xp and a delta 44 card and 1 with vista and edirol all are upto date and i am using vinyl v2 which you said would solve my problem and still no joy and alll you can say is that it works on yours well thankyou very much for your great help is my only solution to buy from a competitor ? who will maybe give me better advice ? i must say i am very dissapionted uncle vibes i have spent a lot of money and time with mixvibes for you to just say well it works for me , very poor