PROBLEM USING MIXVIBES DVS Ultimate WITH U-MIX44

[jazzzax22]

oh i see, no it is not greyed out, i can change it from 48 to 41

[Blackbrook]

48kHz all the way - Input (Recording tab) AND Output (Playback tab)!!!!!

Cheers,

Steve

[jazzzax22]

both are but the playback tab is still grayed out.

[Blackbrook]

How about DVS 7? Does it work now? It is important the the inputs (Recording) is set to 48kHz. This way it should work, does it?

Cheers,

Steve

[jazzzax22]

Nope it still won't work, i have a 100% timecode quality now although, but when i run the install wizard it still wont succesfully calibrate

[Blackbrook]

Does the tracks play? I mean if your timecode is at 100% now can you play tracks? If so you should not mind if the calibration runs wrong

Cheers,

Steve

[jazzzax22]

Because i havn't used it before im not 100% what is meant to happen. On mixvibes i put a track onto it and press play, and it doesnt play or pause it. Although whilst it is in CD mode on the cd players, when i press play and pause it spins the circle thing in the bottom right corner.

[jazzzax22]

This is the photo

[Hannes]

Hi,

I´m not shure, but seeing that you have samples loaded in both decks, i think you just miss them with the Timecode.

Try relative mode or play the timecode from the very beginning, also loading songs would be helping as they are just longer.

regards

[jazzzax22]

If i load a cd in the cd players and press play on them whilst there is a song loaded in mixvibes it will play and pause, the effects on the cds are all over the joint and the mixer effects dont work. Also for some reason i lost the 100% time Code quality.

Here is a Config report.


Config 2011/06/07 17:19

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=27359 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=1.000 Volume max right=1.000 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=CD
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=5345 ms Time limit=720000 ms
Silence seuil=-10.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=33.333 Volume max left=1.000 Volume max right=1.000 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl 3 not connected
Vinyl 4 not connected